Difficulty
Moderate
Steps
5
Time Required
10 - 15 minutes
Sections
2
- Secondary Brush
- 2 steps
- Battery
- 3 steps
Flags
0
BackiRobot Roomba 595 Pet Series
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Secondary Brush
- Flip the Roomba upside down. Using the Phillips #0 screwdriver, carefully remove the 5 mm screw holding the brush in place.
Flip the Roomba upside down. Using the Phillips #0 screwdriver, carefully remove the 5 mm screw holding the brush in place.
1024
Step 2
- Gently pull the brush up and remove it from the device.
Gently pull the brush up and remove it from the device.
Step 3
Battery
- Unscrew the four 10mm screws on the underside of the Roomba using a Phillips #1 screwdriver.
Unscrew the four 10mm screws on the underside of the Roomba using a Phillips #1 screwdriver.
Step 4
- Remove the bottom frame of the device.
Remove the bottom frame of the device.
Step 5
- Grab the green tape attached to the end of the battery and remove the battery from the device.
Grab the green tape attached to the end of the battery and remove the battery from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Adrian Martinez Arbolaez
Member since: 10/02/2017
137 Reputation
1 Guide authored
Badges:
8
+5 more badges
Team
USF Tampa, Team S10-G5, Thompson Fall 2017
Member of USF Tampa, Team S10-G5, Thompson Fall 2017
USFT-THOMPSON-F17S10G5
3 Members
5 Guides authored
elie moussa - Feb 18, 2020
Reply
Pls, can i charge the roomba directly, because the base is not working??