Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
2
- Side Sweeper
- 2 steps
- Battery
- 3 steps
Flags
0
BackiRobot Roomba 560
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Side Sweeper
- Flip the Roomba upside down.
- Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips #2 driver.
Flip the Roomba upside down.
Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips #2 driver.
1024
Step 2
- Lift the yellow side sweeper, removing it from the device.
Lift the yellow side sweeper, removing it from the device.
Step 3
Battery
- Using the Phillips #2 driver, remove the four 10 mm screws that hold the back panel in place.
Using the Phillips #2 driver, remove the four 10 mm screws that hold the back panel in place.
Step 4
- Lift up the back panel to remove it from the device.
Lift up the back panel to remove it from the device.
Step 5
- Lift up the yellow battery by pulling up the green tabs on its side.
- Handle the battery with care.
Lift up the yellow battery by pulling up the green tabs on its side.
Handle the battery with care.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
9 other people completed this guide.
Author
with 8 other contributors
Mairead Blaes
Member since: 10/01/2015
798 Reputation
4 Guides authored
Badges:
15
+12 more badges
Team
Cal Poly, Team 1-22, Maness Fall 2015
Member of Cal Poly, Team 1-22, Maness Fall 2015
CPSU-MANESS-F15S1G22
4 Members
14 Guides authored
