Difficulty

Moderate

Steps

10

Time Required

                          30 minutes

Sections

1

  • iRobot Braava 380t Teardown
  • 10 steps

Flags

5

Grammar Police

Embrace your inner English teacher and help improve this guide’s grammar!

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackiRobot Braava 380t

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              iRobot Braava 380t Teardown
  • Flip over the Braava
  • Remove the 4 screws circled in red in the photo.

Flip over the Braava

Remove the 4 screws circled in red in the photo.

1024

Step 2

  • Flip over the Bravva
  • Raise the bonnet, which should offer no resistance.
  • Disconnect the red and black wire plug.
  • Remove the cover

Flip over the Bravva

Raise the bonnet, which should offer no resistance.

Disconnect the red and black wire plug.

Remove the cover

Step 3

  • The robot is now open. Take the opportunity to clean the contactors on the front.

The robot is now open. Take the opportunity to clean the contactors on the front.

Step 4

  • To continue dismantling and gaining access to the motors, remove the stickers.

To continue dismantling and gaining access to the motors, remove the stickers.

Step 5

  • The screws of the engine covers are then clearly visible.

The screws of the engine covers are then clearly visible.

Step 6

  • Remove the covers
  • Do not try to pull the engine out at this time!

Remove the covers

Do not try to pull the engine out at this time!

Step 7

  • Remove the wheel cover by turning it a few degrees

Remove the wheel cover by turning it a few degrees

Step 8

  • Remove the circlip using special pliers (cut here to be small enough)
  • Take out the wheel, clean the inserted hair

Remove the circlip using special pliers (cut here to be small enough)

Take out the wheel, clean the inserted hair

Step 9

  • Undo the 2 screws. Next, remove the wheel guard.

Undo the 2 screws. Next, remove the wheel guard.

Step 10

  • You can then remove the motor and possibly dismantle the gearbox.

You can then remove the motor and possibly dismantle the gearbox.

To reassemble your device, follow the instructions in reverse order.

Cancel: I did not complete this guide.

        Tech Guy is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Tech Guy

Author

                                      with 1 other contributor 


                    Bossard Nicolas

Member since: 09/21/2018

1,116 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges