Difficulty

Moderate

Steps

9

Time Required

                          5 - 15 minutes

Sections

1

  • Motor
  • 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackiRobot Braava 380t

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Flip Braava upside down and loosen the screw between the two wheels.

Flip Braava upside down and loosen the screw between the two wheels.

1024

Step 2

  • Lift the battery and disconnect the wire connecting the battery.

Lift the battery and disconnect the wire connecting the battery.

Step 3

              Body cover
  • Remove the cleaning pad and the four screws above the battery cavity.

Remove the cleaning pad and the four screws above the battery cavity.

Step 4

  • Flip Braava onto its wheels and pull the cover from the front. Take out the wire the connects the body and the cover.

Flip Braava onto its wheels and pull the cover from the front. Take out the wire the connects the body and the cover.

Step 5

              Wheel
  • Hold the wheel of the defective motor and turn the wheel cover clockwise and take it out when it stops turning.

Hold the wheel of the defective motor and turn the wheel cover clockwise and take it out when it stops turning.

Step 6

  • Use a tweezer to take out the black clip that holds the wheel. Be careful: The clip can fly off.

Use a tweezer to take out the black clip that holds the wheel. Be careful: The clip can fly off.

Step 7

  • Pull out the wheel and take out the silver plate and two screws that hold the washer.

Pull out the wheel and take out the silver plate and two screws that hold the washer.

Step 8

              Motor
  • Flip Braava upside down and peel back the sticker of the defective side and take out four screws. This will get you to the motor.

Flip Braava upside down and peel back the sticker of the defective side and take out four screws. This will get you to the motor.

Step 9

  • Take out the cover and the cable that holds the motor. It is at the bottom corner of the motherboard. The left motor is at the left corner and the right motor is at the right corner.

Take out the cover and the cable that holds the motor. It is at the bottom corner of the motherboard. The left motor is at the left corner and the right motor is at the right corner.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Glowing_Ice

Member since: 06/21/2020

169 Reputation

                                      1 Guide authored                  



                       Badges:
                       1