Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

1

  • Logic Board Assembly
  • 10 steps

Flags

0

  • BackiPod Shuffle 2nd Generation

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Logic Board Assembly
  • Before beginning, be sure your Shuffle is turned off as shown.

Before beginning, be sure your Shuffle is turned off as shown.

1024

Step 2

  • Use the edge of an iPod opening tool to pry the plastic cover off the headphone jack side of the Shuffle.
  • Remove the plastic cover and set it aside.

Use the edge of an iPod opening tool to pry the plastic cover off the headphone jack side of the Shuffle.

Remove the plastic cover and set it aside.

Step 3

  • Remove the two Phillips screws from the headphone jack side of the Shuffle.

Remove the two Phillips screws from the headphone jack side of the Shuffle.

Step 4

  • Use the edge of an iPod opening tool to remove the steel cover from the headphone jack side of the Shuffle.

Use the edge of an iPod opening tool to remove the steel cover from the headphone jack side of the Shuffle.

Step 5

  • Use the edge of an iPod opening tool to pry the plastic cover off the controls side of the Shuffle.
  • Remove the plastic cover and set it aside.

Use the edge of an iPod opening tool to pry the plastic cover off the controls side of the Shuffle.

Step 6

  • Use a pair of tweezers to remove the hold and shuffle sliders from the Shuffle.

Use a pair of tweezers to remove the hold and shuffle sliders from the Shuffle.

Step 7

  • Remove the two Phillips screws on the controls side of the Shuffle.

Remove the two Phillips screws on the controls side of the Shuffle.

Step 8

  • Use the edge of an iPod opening tool to remove the steel plate from the controls side of the Shuffle.

Use the edge of an iPod opening tool to remove the steel plate from the controls side of the Shuffle.

Step 9

  • Use the edge of an iPod opening tool to slightly pry the steel plate on the headphone jack side of the Shuffle away from the lip cut into the outer case.

Use the edge of an iPod opening tool to slightly pry the steel plate on the headphone jack side of the Shuffle away from the lip cut into the outer case.

Step 10

  • Use your iPod opening tool to push the logic board assembly out of the outer case enough to grab the logic board by its edges.
  • Pull the logic board assembly out of the outer case.

Use your iPod opening tool to push the logic board assembly out of the outer case enough to grab the logic board by its edges.

Pull the logic board assembly out of the outer case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      20 other people completed this guide.

Author

                                      with 3 other contributors 


                    Andrew Bookholt

575,478 Reputation

                                      618 Guides authored                  



                       Badges:
                       47







                                                        +44 more badges