Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Top Bezel
- 3 steps
Flags
0
BackiPod Mini
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Top Bezel
- Before opening your iPod, ensure that the hold switch is in the locked position.
Before opening your iPod, ensure that the hold switch is in the locked position.
1024
Step 2
- Carefully insert a small flathead screwdriver or Jimmy in the seam between the metal casing and white plastic top. Use the screwdriver to pry up the white plastic top bezel. Be careful not to damage the soft plastic with your screwdriver.
- The top bezel is held on with an adhesive, so it may be necessary to pry up in several different locations to free the part.
- To make this job easier, heat up the adhesive with a hairdryer on low heat for a few seconds.
Carefully insert a small flathead screwdriver or Jimmy in the seam between the metal casing and white plastic top. Use the screwdriver to pry up the white plastic top bezel. Be careful not to damage the soft plastic with your screwdriver.
The top bezel is held on with an adhesive, so it may be necessary to pry up in several different locations to free the part.
To make this job easier, heat up the adhesive with a hairdryer on low heat for a few seconds.
Step 3
- Lift the top bezel off of the iPod.
Lift the top bezel off of the iPod.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
Author
with 5 other contributors
iRobot
Member since: 09/24/2009
1 Reputation
646 Guides authored
Badges:
36
+33 more badges