Difficulty
Easy
Steps
2
Time Required
30 seconds - 1 minute
Sections
1
- SIM Card
- 2 steps
Flags
0
BackiPhone XR
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
SIM Card
- Insert a SIM card eject tool or a paperclip into the small hole in the SIM card tray, located near the bottom of the edge of the iPhone.
- Press firmly to eject the tray.
Insert a SIM card eject tool or a paperclip into the small hole in the SIM card tray, located near the bottom of the edge of the iPhone.
Press firmly to eject the tray.
1024
Step 2
- Remove the SIM card tray from the iPhone.
- The SIM card will fall out of the tray easily.
- When reinserting the SIM card, ensure that it is in the proper orientation relative to the tray.
- A thin rubber gasket around the SIM tray provides water and dust protection. If this gasket is damaged or missing, replace the gasket or the entire SIM tray to protect your iPhone’s internal components.
Remove the SIM card tray from the iPhone.
The SIM card will fall out of the tray easily.
When reinserting the SIM card, ensure that it is in the proper orientation relative to the tray.
A thin rubber gasket around the SIM tray provides water and dust protection. If this gasket is damaged or missing, replace the gasket or the entire SIM tray to protect your iPhone’s internal components.
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
Cancel: I did not complete this guide.
10 other people completed this guide.
Author
with 2 other contributors
Adam O'Camb
Member since: 04/11/2015
173,479 Reputation
418 Guides authored
Badges:
39
+36 more badges