Difficulty
Easy
Steps
2
Time Required
10 - 20 minutes
Sections
1
- iPega 9023 Disassembly
- 2 steps
Flags
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackiPega 9023
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove Cover
- Remove the four screws with the 3 mm Triage driver from the backside of the controller.
- Use the 3 mm Triage Driver for the screws in red.
- Use the 4 mm nut driver as a makeshift extension to remove the screws in green.
Remove the four screws with the 3 mm Triage driver from the backside of the controller.
Use the 3 mm Triage Driver for the screws in red.
Use the 4 mm nut driver as a makeshift extension to remove the screws in green.
1024
Step 2
Removing the logic board
- Remove the 4 screws holding the logic board in place.
Remove the 4 screws holding the logic board in place.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
Author
with 3 other contributors
FixItYourself
Member since: 07/10/2014
297 Reputation
1 Guide authored
Badges:
7
+4 more badges
COSINITAS - May 27, 2018
Reply
no sonecta celular solo nombre paraece tiene salguien
שחר רוזנברג - Sep 21, 2022
Reply
Which buttons do i need to buy for L1 fix? The buttons that are on the board.