Ion Snapcam 1046 Lite Battery Replacement Repair Guide

Difficulty

Difficult

Steps

Time Required

                          10 minutes

Sections

Camera Lens and Cover
4 steps
Battery
2 steps

Flags

BackiON SnapCam 1046 Lite
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Camera Lens and Cover

Remove any external skins placed on the device. To do so, simply lift up and peel to remove.

Remove any external skins placed on the device. To do so, simply lift up and peel to remove.

1024

Step 2

Firmly pull on the back clip in order to remove.

Firmly pull on the back clip in order to remove.

Step 3

Use a Phillips head screwdriver to remove the four 4mm PH00 screws located on the sides of the device. All screws are located under each of the grey covers for the microSD card and the microUSB insert.

Use a Phillips head screwdriver to remove the four 4mm PH00 screws located on the sides of the device. All screws are located under each of the grey covers for the microSD card and the microUSB insert.

Step 4

Grab a metal or plastic opening tool and insert it into the middle slot on the bottom of the camera and lightly pry open.
Locate the camera lens in the bottom left-hand corner of the picture which can be replaced by replacing the entire cover. The back of the cover is also shown. The camera is now located in the top right-hand corner of the picture.

Grab a metal or plastic opening tool and insert it into the middle slot on the bottom of the camera and lightly pry open.

Locate the camera lens in the bottom left-hand corner of the picture which can be replaced by replacing the entire cover. The back of the cover is also shown. The camera is now located in the top right-hand corner of the picture.

Step 5

              Battery

Use a nylon spudger to gently pry the four tabs holding the motherboard in place.

Use a nylon spudger to gently pry the four tabs holding the motherboard in place.

Step 6

Lift the motherboard to reveal the battery compartment. Remove the thermal tape holding it in place and replace battery.
WARNING: Lithium Battery!

Lift the motherboard to reveal the battery compartment. Remove the thermal tape holding it in place and replace battery.

WARNING: Lithium Battery!

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Travis Leondis

Member since: 11/20/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team S22-G4, Bayer Fall 2017                        

                                                  Member of IUPUI, Team S22-G4, Bayer Fall 2017 



                    IUPUI-BAYER-F17S22G4                     


                                            5 Members                     


                                            4 Guides authored

james - Feb 14, 2020

Can you please list the battery specifications for selecting the correct replacement battery?

Thank you for the posting and assistance.

Issis - Jun 23, 2020

Where can I find a replacement battery?

Introduction#

What you need#

Team#

Introduction

What you need

Team