Difficulty
Moderate
Steps
5
Time Required
5 - 10 minutes
Sections
1
- Record and Stop Switch
- 5 steps
Flags
0
BackIon Air Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Record and Stop Switch
- Remove the six screws (3 mm) that secure the lens cover bezel with a #00 Phillips screwdriver.
Remove the six screws (3 mm) that secure the lens cover bezel with a #00 Phillips screwdriver.
1024
Step 2
- Remove the blue securing the lens cover. Then simply pull off the lens cover itself.
Remove the blue securing the lens cover. Then simply pull off the lens cover itself.
Step 3
- Remove black aluminum casing as shown.
Remove black aluminum casing as shown.
Step 4
- Using a #00 Phillips screwdriver, unscrew the screw securing the record/stop switch.
Using a #00 Phillips screwdriver, unscrew the screw securing the record/stop switch.
Step 5
- Remove the record/stop switch. You are then able to replace the switch.
- Be careful to not misplace the power button and spring that will no longer be secured when the switch is removed.
Remove the record/stop switch. You are then able to replace the switch.
Be careful to not misplace the power button and spring that will no longer be secured when the switch is removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Christopher Brandl
Member since: 10/09/2018
673 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
UW Stout, Team S6-G2, Ogden Fall 2018
Member of UW Stout, Team S6-G2, Ogden Fall 2018
UWSTOUT-OGDEN-F18S6G2
4 Members
5 Guides authored
