Difficulty
Moderate
Steps
5
Time Required
9 - 10 minutes
Sections
1
- Power Button
- 5 steps
Flags
0
BackIon Air Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Power Button
- Remove the 6 screws that secure the lens cover bezel with a #00 Phillips screwdriver.
Remove the 6 screws that secure the lens cover bezel with a #00 Phillips screwdriver.
1024
Step 2
- Slide off the black aluminum casing.
Slide off the black aluminum casing.
Step 3
- Unscrew the top screw that is by the power button using a #00 Phillips screwdriver.
- A spring is being held down by the screw. be sure to hold it down.
Unscrew the top screw that is by the power button using a #00 Phillips screwdriver.
A spring is being held down by the screw. be sure to hold it down.
Step 4
- Lift off the plastic part holding the power button in place.
Lift off the plastic part holding the power button in place.
Step 5
- Remove the power button from the device.
Remove the power button from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Christopher Brandl
Member since: 10/09/2018
673 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
UW Stout, Team S6-G2, Ogden Fall 2018
Member of UW Stout, Team S6-G2, Ogden Fall 2018
UWSTOUT-OGDEN-F18S6G2
4 Members
5 Guides authored
