Difficulty
Easy
Steps
5
Time Required
2 - 5 minutes
Sections
1
- Case
- 5 steps
Flags
0
BackIomega Z100S2
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Case
- Push in the plastic tab that can be seen through cracks in the front left corner using a spudger.
Push in the plastic tab that can be seen through cracks in the front left corner using a spudger.
1024
Step 2
- Move down the same side and push in the plastic tab.
Move down the same side and push in the plastic tab.
Step 3
- Move to the front right side and once again push in the plastic tab.
- There is not a fourth tab to push in after this one.
Move to the front right side and once again push in the plastic tab.
There is not a fourth tab to push in after this one.
Step 4
- Grab the cover by the front side and pull upwards.
- You might encounter some resistance. Pull firmly, but don’t yank it.
Grab the cover by the front side and pull upwards.
You might encounter some resistance. Pull firmly, but don’t yank it.
Step 5
- Tilt the front case down until the pegs detach from the bottom of the case.
- Lift up and outward.
- The motherboard will be loose at this point.
Tilt the front case down until the pegs detach from the bottom of the case.
Lift up and outward.
The motherboard will be loose at this point.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 3 other contributors
Chris Rudolph
Member since: 10/05/2010
82 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Cal Poly, Team 7-53, Amido Fall 2010
Member of Cal Poly, Team 7-53, Amido Fall 2010
CPSU-AMIDO-F10S7G53
4 Members
3 Guides authored
