Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
1
- Hard Drive Replacement
- 3 steps
Flags
2
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Backiomega LDHD250-U
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove Rear Screws
- Remember to power off and unplug the unit before opening it up!
- Remove the two PH #0 Screws
Remember to power off and unplug the unit before opening it up!
Remove the two PH #0 Screws
1024
Step 2
Removing the cover
- After removing the back part of the unit, slide the front part out.
- Remember to put aside the center part you removed
After removing the back part of the unit, slide the front part out.
Remember to put aside the center part you removed
Step 3
Removing the Hard Drive
- There are two ways to remove the Hard Drive
- Removing the 4 screws on the side of the unit
- Sliding the HDD back and then releasing it (my unit will not slide back)
- The HDD can now be lifted out, unplugged, and replaced, upgraded, or keep it the same.
- Pull up and unplug as the cables can break if too much force is applied
There are two ways to remove the Hard Drive
Removing the 4 screws on the side of the unit
Sliding the HDD back and then releasing it (my unit will not slide back)
The HDD can now be lifted out, unplugged, and replaced, upgraded, or keep it the same.
Pull up and unplug as the cables can break if too much force is applied
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Nate Pritzker
Member since: 10/12/2017
428 Reputation
2 Guides authored
Badges:
11
+8 more badges
