Inter Tel Ip 8660 Lcd Screen Replacement Repair Guide

Difficulty

Easy

Steps

10

Time Required

                          5 minutes            

Sections

3

• Rear Cover
• 3 steps
• Internal speaker
• 2 steps
• LCD Screen
• 5 steps

Flags

2

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackInter-tel IP 8660

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Cover               

• Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.

Before disassembling the phone, make sure it is not plugged into power and the handset phone cord is disconnected from the handset jack.

1024

Step 2

• Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.
• 8 mm long
• 11 mm long

Unscrew the 9 highlighted screws using a #1 Phillips head screwdriver. You can use a magnetized screwdriver to draw them out.

8 mm long

11 mm long

Step 3

• Lift up the back cover and set it aside.

Lift up the back cover and set it aside.

Step 4

              Internal speaker               

• While holding down the motherboard, gently pull the wire harness connecting the speaker to the motherboard until it comes free.

While holding down the motherboard, gently pull the wire harness connecting the speaker to the motherboard until it comes free.

Step 5

• Lift up the speaker.

Lift up the speaker.

Step 6

              LCD Screen               

• Lift up the motherboard out of its housing in the front cover of the phone.
• Set the front cover and button pads aside.

Lift up the motherboard out of its housing in the front cover of the phone.

Set the front cover and button pads aside.

Step 7

• Using tweezers, pinch the highlighted connective clips together and depress. Start with the clips in the middle of the motherboard first.
• Note: There are four clips, one at each corner of the LCD screen.

Using tweezers, pinch the highlighted connective clips together and depress. Start with the clips in the middle of the motherboard first.

Note: There are four clips, one at each corner of the LCD screen.

Step 8

• Flip the motherboard over so that the LCD screen is facing upward.

Flip the motherboard over so that the LCD screen is facing upward.

Step 9

• Push the black clip holding the ribbon cable out of its casing using the plastic opening tool.
• This is done using the spudger to lift one side out of its housing.
• Reposition the spudger to the other side of the black clip and push it flush with the other end.
• Note: The black clip pushes out of the housing and does not come completely loose.

Push the black clip holding the ribbon cable out of its casing using the plastic opening tool.

This is done using the spudger to lift one side out of its housing.

Reposition the spudger to the other side of the black clip and push it flush with the other end.

Note: The black clip pushes out of the housing and does not come completely loose.

Step 10

• Pull gently on the ribbon cable so that it comes loose from the black clip.

Pull gently on the ribbon cable so that it comes loose from the black clip.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Juan David GutierrezFranco                     

Member since: 01/20/2012

67 Reputation

                                      4 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Cal Poly, Team 11-24, Maness Winter 2012                        

                                                  Member of Cal Poly, Team 11-24, Maness Winter 2012 



                    CPSU-MANESS-W12S11G24                     


                                            4 Members                     


                                            14 Guides authored