Instax Mini 90 Film Cartridge Replacement Repair Guide

Difficulty

Very easy

Steps

4

Time Required

                          3 minutes            

Sections

1

• Film Cartridge
• 4 steps

Flags

0

• BackInstax Mini 90

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Film Cartridge               

• Turn ON the camera, and flip it over so that the back cover is visible.

Turn ON the camera, and flip it over so that the back cover is visible.

1024

Step 2

• Unlock the back cover. It should automatically spring open. If there is an old film cartridge loaded in the camera, remove it.

Unlock the back cover. It should automatically spring open. If there is an old film cartridge loaded in the camera, remove it.

Step 3

• Unwrap the new film cartridge, taking care to not touch the film inside. Only handle the film cartridge by its plastic shell.
• Line up the small, yellow line on the cartridge with the corresponding yellow line inside the camera. The yellow line on the cartridge should be facing up, away from the camera.

Unwrap the new film cartridge, taking care to not touch the film inside. Only handle the film cartridge by its plastic shell.

Line up the small, yellow line on the cartridge with the corresponding yellow line inside the camera. The yellow line on the cartridge should be facing up, away from the camera.

Step 4

• Close the back cover. The film covering should eject automatically.

Close the back cover. The film covering should eject automatically.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Elliott Tegan-Tawney                     

Member since: 02/28/2017

690 Reputation

                                      5 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       USF Tampa, Team S2-G1, Nance Spring 2017                        

                                                  Member of USF Tampa, Team S2-G1, Nance Spring 2017 



                    USFT-NANCE-S17S2G1                     


                                            4 Members                     


                                            12 Guides authored                     

Lawrence Cassel - Dec 25, 2018

Reply

Having an issue with the film pack not loading. Have tried resetting, removing battery etc. Any ideas?

susan ahrent - Aug 28, 2019

Reply

Me too! Ive removed battery, replaced with fresh battery, nothing happens! Ive just used it once! Help!!

ap5029 - Apr 6, 2020

Reply

I’m having the same problem and I’ve tried everything. Someone help! The film simply isn’t being recognized (no blinking E or anything like that).

Elliott Tegan-Tawney - Apr 6, 2020

Reply

I am not too sure how to fix that, but definitely try contacting Fujifilm, as they know much more about their products and do repairs as well! https://www.fujifilmusa.com/support/Serv…