Difficulty
Easy
Steps
5
Time Required
10 minutes
Sections
2
- Disassembling the Inspiron 7359 2-in-1
- 4 steps
- WiFi Card
- 1 step
Flags
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Better Introduction
Improve this guide by completing or revising its introduction.
BackDell Inspiron 13 P57G002
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Disassembling the Inspiron 7359 2-in-1
- Turn off device before starting.
- Turn the laptop upside down with the logo facing the surface of the table.
Turn off device before starting.
Turn the laptop upside down with the logo facing the surface of the table.
1024
Step 2
- Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.
Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.
Step 3
- Use a spudger to separate the back cover from the laptop.
- Start from one corner and work your way around the edge of the cover.
- Be careful not to bend or crack the back cover.
Use a spudger to separate the back cover from the laptop.
Start from one corner and work your way around the edge of the cover.
Be careful not to bend or crack the back cover.
Step 4
- All hardware components should be exposed.
All hardware components should be exposed.
Step 5
WiFi Card
- Use the spudger tool to remove the two antenna cables.
- Remove the black screw.
- Slightly pull up the end and remove the WiFi card. Be careful not to damage the internal adapter.
Use the spudger tool to remove the two antenna cables.
Remove the black screw.
Slightly pull up the end and remove the WiFi card. Be careful not to damage the internal adapter.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Annberlisa Ronald
Member since: 08/26/2019
103 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Gateway, Team S1-G3, Saknee Fall 2019
Member of Gateway, Team S1-G3, Saknee Fall 2019
GCC-SAKNEE-F19S1G3
4 Members
6 Guides authored