Inspiron 7359 2 In 1 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          15 minutes            

Sections

2

• Disassembling the Inspiron 7359 2-in-1
• 4 steps
• Screen
• 3 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Better Introduction

Improve this guide by completing or revising its introduction.

• BackDell Inspiron 13 P57G002

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Disassembling the Inspiron 7359 2-in-1               

• Turn off device before starting.
• Turn the laptop upside down with the logo facing the surface of the table.

Turn off device before starting.

Turn the laptop upside down with the logo facing the surface of the table.

1024

Step 2

• Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

Step 3

• Use a spudger to separate the back cover from the laptop.
• Start from one corner and work your way around the edge of the cover.
• Be careful not to bend or crack the back cover.

Use a spudger to separate the back cover from the laptop.

Start from one corner and work your way around the edge of the cover.

Be careful not to bend or crack the back cover.

Step 4

• All hardware components should be exposed.

All hardware components should be exposed.

Step 5

              Screen               

• Using a spudger or opening pick, carefully pry in between the screen and the screen backing.
• After opening the LCD Screen, slowly and carefully open the laptop so the front of the screen touches the keyboard.

Using a spudger or opening pick, carefully pry in between the screen and the screen backing.

After opening the LCD Screen, slowly and carefully open the laptop so the front of the screen touches the keyboard.

Step 6

• Slowly peel back the tape that is attached to the screen itself.
• Once the tape is removed, gently disconnect the attached cables.

Slowly peel back the tape that is attached to the screen itself.

Once the tape is removed, gently disconnect the attached cables.

Step 7

• Carefully disconnect the attached cable.
• Once you remove the attached cable, gently lift up the LCD panel.

Carefully disconnect the attached cable.

Once you remove the attached cable, gently lift up the LCD panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Dominique                     

Member since: 08/26/2019

236 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Gateway, Team S1-G3, Saknee Fall 2019                        

                                                  Member of Gateway, Team S1-G3, Saknee Fall 2019 



                    GCC-SAKNEE-F19S1G3                     


                                            4 Members                     


                                            6 Guides authored