Difficulty

Very easy

Steps

6

Time Required

                          10 minutes

Sections

2

  • Disassembling the Inspiron 7359 2-in-1
  • 4 steps
  • Hard Disk Drive
  • 2 steps

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackDell Inspiron 13 P57G002

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Disassembling the Inspiron 7359 2-in-1
  • Turn off device before starting.
  • Turn the laptop upside down with the logo facing the surface of the table.

Turn off device before starting.

Turn the laptop upside down with the logo facing the surface of the table.

1024

Step 2

  • Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

Use a Phillips #0 screwdriver to remove the ten 8mm screws from the back case of the laptop.

Step 3

  • Use a spudger to separate the back cover from the laptop.
  • Start from one corner and work your way around the edge of the cover.
  • Be careful not to bend or crack the back cover.

Use a spudger to separate the back cover from the laptop.

Start from one corner and work your way around the edge of the cover.

Be careful not to bend or crack the back cover.

Step 4

  • All hardware components should be exposed.

All hardware components should be exposed.

Step 5

              Hard Disk Drive
  • Unscrew three 3mm screws with a Phillips #0 screwdriver and remove them.
  • These screws hold the hdd and removing these screws will make it easier to remove it.

Unscrew three 3mm screws with a Phillips #0 screwdriver and remove them.

These screws hold the hdd and removing these screws will make it easier to remove it.

Step 6

  • Lift the hard drive from the left side. Be careful not pull on it.
  • Pull the SATA cable that’s connect to the hard drive and then carefully place the cable on the side.

Lift the hard drive from the left side. Be careful not pull on it.

Pull the SATA cable that’s connect to the hard drive and then carefully place the cable on the side.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    meetkumar  desai

Member since: 10/08/2017

330 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       Gateway, Team S1-G3, Saknee Fall 2019                        

                                                  Member of Gateway, Team S1-G3, Saknee Fall 2019 



                    GCC-SAKNEE-F19S1G3                     


                                            4 Members                     


                                            6 Guides authored