Difficulty

Moderate

Steps

6

Time Required

                          30 minutes

Sections

2

  • Battery
  • 4 steps
  • Motor
  • 2 steps

Flags

0

  • BackInsignia NS-VCS14SL7

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Push down the black button to release the dust cup.
  • Pull the dust cup up and away from handheld portion to remove.

Push down the black button to release the dust cup.

Pull the dust cup up and away from handheld portion to remove.

1024

Step 2

  • Remove the five 12.0 mm screws on the back of the handheld portion using the Phillips #2 screwdriver.
  • Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring.

Remove the five 12.0 mm screws on the back of the handheld portion using the Phillips #2 screwdriver.

Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring.

Step 3

  • Pull apart the red and black wires.
  • Do so for all of the wires. (Red x1, Black x2)

Pull apart the red and black wires.

Do so for all of the wires. (Red x1, Black x2)

Step 4

  • Remove the tape holding the battery to the black housing.
  • Slide the entire battery bundle out.

Remove the tape holding the battery to the black housing.

Slide the entire battery bundle out.

Step 5

              Motor
  • Use plastic spudger to remove blue wire from motor, freeing the motor.

Use plastic spudger to remove blue wire from motor, freeing the motor.

Step 6

  • Twist and pull black casing off of the motor, leaving the motor and irremovable black impeller housing.

Twist and pull black casing off of the motor, leaving the motor and irremovable black impeller housing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Thibaut Pillot

Member since: 02/15/2018

434 Reputation

                                      5 Guides authored                  



                       Badges:
                       3

Team

                       USF Tampa, Team S16-G3, Boczar Spring 2018                        

                                                  Member of USF Tampa, Team S16-G3, Boczar Spring 2018 



                    USFT-BOCZAR-S18S16G3                     


                                            4 Members                     


                                            12 Guides authored