Difficulty
Moderate
Steps
4
Time Required
30 minutes
Sections
1
- Battery
- 4 steps
Flags
0
BackInsignia NS-VCS14SL7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Push down the black button to release the dust cup.
- Pull the dust cup up and away from handheld portion to remove.
Push down the black button to release the dust cup.
Pull the dust cup up and away from handheld portion to remove.
1024
Step 2
- Remove the five 12.0 mm screws on the back of the handheld portion using the Phillips #2 screwdriver.
- Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring.
Remove the five 12.0 mm screws on the back of the handheld portion using the Phillips #2 screwdriver.
Lift the silver cover off of the black body of the handheld portion to expose the battery and wiring.
Step 3
- Pull apart the red and black wires.
- Do so for all of the wires. (Red x1, Black x2)
Pull apart the red and black wires.
Do so for all of the wires. (Red x1, Black x2)
Step 4
- Remove the tape holding the battery to the black housing.
- Slide the entire battery bundle out.
Remove the tape holding the battery to the black housing.
Slide the entire battery bundle out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Trevor Rau
Member since: 02/15/2018
270 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
USF Tampa, Team S16-G3, Boczar Spring 2018
Member of USF Tampa, Team S16-G3, Boczar Spring 2018
USFT-BOCZAR-S18S16G3
4 Members
12 Guides authored
