Difficulty
Difficult
Steps
6
Time Required
45 minutes
Sections
1
- Bluetooth Button
- 6 steps
Flags
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
BackInsignia NS-SPBTBRICK
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bluetooth Button
- Remove the rubber sleeve.
Remove the rubber sleeve.
1024
Step 2
- Remove 4 screws from the green, plastic button cover.
Remove 4 screws from the green, plastic button cover.
Step 3
- After successfully removing the plastic cover, use a sauter against the bluetooth button. The heat will make the removal of the button easy.
After successfully removing the plastic cover, use a sauter against the bluetooth button. The heat will make the removal of the button easy.
Step 4
- Place the new bluetooth button in the place of the old bluetooth button and mend the button into place using heat.
Place the new bluetooth button in the place of the old bluetooth button and mend the button into place using heat.
Step 5
- Screw the 4 screws of the plastic button cover back onto the device.
Screw the 4 screws of the plastic button cover back onto the device.
Step 6
- Put the plastic sleeve back onto the speaker.
Put the plastic sleeve back onto the speaker.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Erin Steele
Member since: 03/08/2017
649 Reputation
5 Guides authored
Badges:
5
+2 more badges
Team
UMass Dartmouth, Team S5-G2, Botvin Spring 2017
Member of UMass Dartmouth, Team S5-G2, Botvin Spring 2017
UMASSD-BOTVIN-S17S5G2
2 Members
6 Guides authored
