Insignia Ns Hd01A Battery Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          5 minutes            

Sections

1

• Battery
• 5 steps

Flags

0

• BackInsignia NS-HD01A

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Remove the rubber screw caps using the pointed tip of the Spudger.

Remove the rubber screw caps using the pointed tip of the Spudger.

1024

Step 2

• Remove the four 6.0 mm Phillips screws located below the rubber caps using the PH00 bit installed in the driver.

Remove the four 6.0 mm Phillips screws located below the rubber caps using the PH00 bit installed in the driver.

Step 3

• Use the plastic opening tool to pry open the back cover.
• Slide the tool around the sides of the radio to gradually pry the back cover off. Do not remove the cover completely as there is still a cable connecting it to radio.

Use the plastic opening tool to pry open the back cover.

Slide the tool around the sides of the radio to gradually pry the back cover off. Do not remove the cover completely as there is still a cable connecting it to radio.

Step 4

• Use the blunt tweezers to unplug the battery cable from the PCB board. Grab the battery cable plug from the sides.

Use the blunt tweezers to unplug the battery cable from the PCB board. Grab the battery cable plug from the sides.

Step 5

• Use the flat side of the Spudger to pry the battery out of the back cover.
• Insert the replacement battery into the back cover.
• Reassemble the radio, making sure to reconnect the battery cable.

Use the flat side of the Spudger to pry the battery out of the back cover.

Insert the replacement battery into the back cover.

Reassemble the radio, making sure to reconnect the battery cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Joel Najmon                     

Member since: 10/08/2016

152 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       IUPUI, Team 2-2, Wilson Fall 2016                        

                                                  Member of IUPUI, Team 2-2, Wilson Fall 2016 



                    IUPUI-WILSON-F16S2G2                     


                                            5 Members                     


                                            1 Guide authored