Difficulty

Moderate

Steps

13

Time Required

                          10 - 15 minutes

Sections

3

  • Bottom Cover
  • 5 steps
  • Disc Tray
  • 2 steps
  • Speakers
  • 6 steps

Flags

0

  • BackInsignia NS-DS9PDVD15

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Bottom Cover
  • Turn the power off. Slide the power button to OFF.

Turn the power off. Slide the power button to OFF.

1024

Step 2

  • Unplug AC adapter from car cigarette lighter.

Unplug AC adapter from car cigarette lighter.

Step 3

  • Make sure there is no DVD or CD in the disc tray

Make sure there is no DVD or CD in the disc tray

Step 4

  • Unscrew the nine 9mm screws with a JIS #000 screwdriver.

Unscrew the nine 9mm screws with a JIS #000 screwdriver.

Step 5

  • Pry off back panel with prying tool, then remove by hand.

Pry off back panel with prying tool, then remove by hand.

Step 6

              Disc Tray
  • After the back is removed and the disk tray is loose from the bottom, locate the two, 3 mm screws that hold the tray to the hinge.
  • Unscrew them with the JIS #000 screwdriver.

After the back is removed and the disk tray is loose from the bottom, locate the two, 3 mm screws that hold the tray to the hinge.

Unscrew them with the JIS #000 screwdriver.

Step 7

  • Slide the tray up and off of the hinge completely.

Slide the tray up and off of the hinge completely.

Step 8

              Speakers
  • After the bottom cover and disk tray have been removed, remove the back panel from the top half.
  • There are six, 9mm screws on the bottom cover and 2 screws on the hinge. Remove them with the JIS #000 screwdriver.

After the bottom cover and disk tray have been removed, remove the back panel from the top half.

There are six, 9mm screws on the bottom cover and 2 screws on the hinge. Remove them with the JIS #000 screwdriver.

Step 9

  • Once all the screws are removed, pry off the cover with the pry tool.
  • You’ll see the PC board, back of the speakers, and the back of the screen.

Once all the screws are removed, pry off the cover with the pry tool.

You’ll see the PC board, back of the speakers, and the back of the screen.

Step 10

  • Remove the ribbon cable carefully with the pry tool.
  • First, push out the black portion.

Remove the ribbon cable carefully with the pry tool.

First, push out the black portion.

Step 11

  • Then, push out the ‘ribbon’ with the pry tool.

Then, push out the ‘ribbon’ with the pry tool.

Step 12

  • After the ribbon cable is removed, unscrew the eight, 9 mm screws from the PC board

After the ribbon cable is removed, unscrew the eight, 9 mm screws from the PC board

Step 13

  • Flip over the PC board. Remove the two sets of red and black wires which connect to the speakers.
  • Use the pry tool at the white clip, to remove the wires. Then you can remove the speakers.
  • The wire second to left connects to the screen. Remove the far left wire–circled in the first picture– to remove the left speaker.

Flip over the PC board. Remove the two sets of red and black wires which connect to the speakers.

Use the pry tool at the white clip, to remove the wires. Then you can remove the speakers.

The wire second to left connects to the screen. Remove the far left wire–circled in the first picture– to remove the left speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Johnny Rozo

Member since: 04/03/2018

583 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Linn Benton Community College, Team S1-G6, Johnson Spring 2018                        

                                                  Member of Linn Benton Community College, Team S1-G6, Johnson Spring 2018 



                    LBCC-JOHNSON-S18S1G6                     


                                            4 Members                     


                                            6 Guides authored