Difficulty
Moderate
Steps
7
Time Required
7 minutes
Sections
2
- Bottom Cover
- 5 steps
- Disc Tray
- 2 steps
Flags
0
BackInsignia NS-DS9PDVD15
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Turn the power off. Slide the power button to OFF.
Turn the power off. Slide the power button to OFF.
1024
Step 2
- Unplug AC adapter from car cigarette lighter.
Unplug AC adapter from car cigarette lighter.
Step 3
- Make sure there is no DVD or CD in the disc tray
Make sure there is no DVD or CD in the disc tray
Step 4
- Unscrew the nine 9mm screws with a JIS #000 screwdriver.
Unscrew the nine 9mm screws with a JIS #000 screwdriver.
Step 5
- Pry off back panel with prying tool, then remove by hand.
Pry off back panel with prying tool, then remove by hand.
Step 6
Disc Tray
- After the back is removed and the disk tray is loose from the bottom, locate the two, 3 mm screws that hold the tray to the hinge.
- Unscrew them with the JIS #000 screwdriver.
After the back is removed and the disk tray is loose from the bottom, locate the two, 3 mm screws that hold the tray to the hinge.
Unscrew them with the JIS #000 screwdriver.
Step 7
- Slide the tray up and off of the hinge completely.
Slide the tray up and off of the hinge completely.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Conner Kaer
Member since: 04/05/2018
85 Reputation
1 Guide authored
Badges:
2
Team
Linn Benton Community College, Team S1-G6, Johnson Spring 2018
Member of Linn Benton Community College, Team S1-G6, Johnson Spring 2018
LBCC-JOHNSON-S18S1G6
4 Members
6 Guides authored