Difficulty

Moderate

Steps

10

Time Required

                          7 - 10 minutes

Sections

3

  • Bottom Cover
  • 5 steps
  • Disc Tray
  • 2 steps
  • Disc Reader
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackInsignia NS-DS9PDVD15

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Bottom Cover
  • Turn the power off. Slide the power button to OFF.

Turn the power off. Slide the power button to OFF.

1024

Step 2

  • Unplug AC adapter from car cigarette lighter.

Unplug AC adapter from car cigarette lighter.

Step 3

  • Make sure there is no DVD or CD in the disc tray

Make sure there is no DVD or CD in the disc tray

Step 4

  • Unscrew the nine 9mm screws with a JIS #000 screwdriver.

Unscrew the nine 9mm screws with a JIS #000 screwdriver.

Step 5

  • Pry off back panel with prying tool, then remove by hand.

Pry off back panel with prying tool, then remove by hand.

Step 6

              Disc Tray
  • After the back is removed and the disk tray is loose from the bottom, locate the two, 3 mm screws that hold the tray to the hinge.
  • Unscrew them with the JIS #000 screwdriver.

After the back is removed and the disk tray is loose from the bottom, locate the two, 3 mm screws that hold the tray to the hinge.

Unscrew them with the JIS #000 screwdriver.

Step 7

  • Slide the tray up and off of the hinge completely.

Slide the tray up and off of the hinge completely.

Step 8

              Disc Reader
  • Locate the disk reader, it will be right under the disk chamber.

Locate the disk reader, it will be right under the disk chamber.

Step 9

  • Pick it straight up, it should slide off the three pegs holding it in place, if not, wiggle each peg individually.

Pick it straight up, it should slide off the three pegs holding it in place, if not, wiggle each peg individually.

Step 10

  • Once you have it loose, unplug it from the PC Board. Then the disk reader can be removed.

Once you have it loose, unplug it from the PC Board. Then the disk reader can be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Johnny Rozo

Member since: 04/03/2018

583 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Linn Benton Community College, Team S1-G6, Johnson Spring 2018                        

                                                  Member of Linn Benton Community College, Team S1-G6, Johnson Spring 2018 



                    LBCC-JOHNSON-S18S1G6                     


                                            4 Members                     


                                            6 Guides authored