Difficulty

Easy

Steps

8

Time Required

                          10 minutes

Sections

1

  • Speakers
  • 8 steps

Flags

0

  • BackInsignia NS-CSPBTHOL-R

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speakers
  • Insert the Spudger between the grated panel and the base of the speaker.

Insert the Spudger between the grated panel and the base of the speaker.

1024

Step 2

  • Pull the grated panel off

Pull the grated panel off

Step 3

  • Remove the six 3mm screws using the J00 JIS screw bit. This will require a long, narrow screwdriver.

Remove the six 3mm screws using the J00 JIS screw bit. This will require a long, narrow screwdriver.

Step 4

  • Insert the Spudger between the corners of base and the face of the speaker to open the device.
  • The screw on the upper right corner may be difficult to take out. If you cannot take it out with a screwdriver, using force to pull the face of the speaker apart may break the plastic that surrounds the screw.

Insert the Spudger between the corners of base and the face of the speaker to open the device.

The screw on the upper right corner may be difficult to take out. If you cannot take it out with a screwdriver, using force to pull the face of the speaker apart may break the plastic that surrounds the screw.

Step 5

  • Remove one speaker at a time

Remove one speaker at a time

Step 6

  • Grab the back piece of the speaker and gently pull upward.

Grab the back piece of the speaker and gently pull upward.

Step 7

  • Remove speakers gently one at a time.

Remove speakers gently one at a time.

Step 8

  • Using blunted tip tweezers, squeeze and pull on the white plastic clip. This will separate the speaker’s wires from the motherboard.
  • The wires are connected to the white plastic clip that is attached to the motherboard.

Using blunted tip tweezers, squeeze and pull on the white plastic clip. This will separate the speaker’s wires from the motherboard.

The wires are connected to the white plastic clip that is attached to the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Lheessis Ruiz

Member since: 02/15/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       USF Tampa, Team 12-6, Eyestone Spring 2017                        

                                                  Member of USF Tampa, Team 12-6, Eyestone Spring 2017 



                    USFT-EYESTONE-S17S12G6                     


                                            3 Members                     


                                            4 Guides authored

rrguerrero7330 - Oct 13, 2022

Reply

This is a good app really could help some people like myself. Thank you