Difficulty

Easy

Steps

8

Time Required

                          6 minutes

Sections

2

  • Battery
  • 7 steps
  • Power Button
  • 1 step

Flags

0

  • BackInsignia NS-CSPBTHOL-R

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Push the Spudger into the crevice between the grated panel of the speaker and the base of the speaker.
  • Angle the spudger to create a separation between the grate and the base.

Push the Spudger into the crevice between the grated panel of the speaker and the base of the speaker.

Angle the spudger to create a separation between the grate and the base.

1024

Step 2

  • Slide the spudger along the separation between the grate and the base of the speaker to loosen the grate. Do this to the entire perimeter of the speaker.

Slide the spudger along the separation between the grate and the base of the speaker to loosen the grate. Do this to the entire perimeter of the speaker.

Step 3

  • Pull the grated panel off.

Pull the grated panel off.

Step 4

  • Remove the six 3mm screws using the J00 JIS screw bit. This will require a long, narrow screwdriver.

Remove the six 3mm screws using the J00 JIS screw bit. This will require a long, narrow screwdriver.

Step 5

  • Push the spudger into the crevice between the base and the face of the speaker and create a separation.
  • Slide the spudger along the entire perimeter and gently pull off the face of the speaker.
  • The two parts are connected by wires, do not rip them apart.

Push the spudger into the crevice between the base and the face of the speaker and create a separation.

Slide the spudger along the entire perimeter and gently pull off the face of the speaker.

The two parts are connected by wires, do not rip them apart.

Step 6

  • Use the spudger to release the battery by sliding it underneath the battery to create a separation.
  • Remove the battery.

Use the spudger to release the battery by sliding it underneath the battery to create a separation.

Remove the battery.

Step 7

  • Pull the motherboard from the base of the speaker.
  • Using tweezers, squeeze and pull on the white plastic clip that connects the battery wires to the motherboard.
  • Unclip the battery from the motherboard.

Pull the motherboard from the base of the speaker.

Using tweezers, squeeze and pull on the white plastic clip that connects the battery wires to the motherboard.

Unclip the battery from the motherboard.

Step 8

              Power Button
  • Using tweezers, detach the power button from the mother board.

Using tweezers, detach the power button from the mother board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Judith Villegas

Member since: 02/15/2017

312 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       USF Tampa, Team 12-6, Eyestone Spring 2017                        

                                                  Member of USF Tampa, Team 12-6, Eyestone Spring 2017 



                    USFT-EYESTONE-S17S12G6                     


                                            3 Members                     


                                            4 Guides authored