Difficulty

Moderate

Steps

14

Time Required

                          25 minutes

Sections

1

  • Keypad
  • 14 steps

Flags

2

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

  • BackInsignia NS-CLIP02

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Physically unplug and switch off the device before you start. Once you have finished the replacement, consider recycling the old motherboard at an electronic recycling center near you.

What you need

Step 1

              Keypad
  • Locate the bottom of the device.

Locate the bottom of the device.

1024

Step 2

  • Begin by using a metal spudger to peel back the adhesive sticker and locate the 11mm screw beneath the sticker.

Begin by using a metal spudger to peel back the adhesive sticker and locate the 11mm screw beneath the sticker.

Step 3

  • Locate the 11mm screw beneath the sticker.

Locate the 11mm screw beneath the sticker.

Step 4

  • Using a plastic spudger, peel off the adhesive gel stoppers.

Using a plastic spudger, peel off the adhesive gel stoppers.

Step 5

  • Continue peeling the rest of the gel stoppers from the bottom of the device.

Continue peeling the rest of the gel stoppers from the bottom of the device.

Step 6

  • Begin unscrewing the six 11mm screws with a Phillips head screw driver.

Begin unscrewing the six 11mm screws with a Phillips head screw driver.

Step 7

  • Once you peel off the bottom from the device, you will see the motherboard.

Once you peel off the bottom from the device, you will see the motherboard.

Step 8

  • Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.

Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.

Step 9

  • Lift the motherboard from the device.

Lift the motherboard from the device.

Step 10

  • Locate the four plugs connecting the motherboard to the rest of the device.

Locate the four plugs connecting the motherboard to the rest of the device.

Step 11

  • Begin with removing the plug to your left.

Begin with removing the plug to your left.

Step 12

  • Remove the plug to your right from the motherboard.

Remove the plug to your right from the motherboard.

Step 13

  • Remove the plug in the front of the lcd screen plug.

Remove the plug in the front of the lcd screen plug.

Step 14

  • Remove the LCD screen plug last. Then, follow the following instructions in reverse, replacing the old motherboard with the new one to fix the keypad.

Remove the LCD screen plug last. Then, follow the following instructions in reverse, replacing the old motherboard with the new one to fix the keypad.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 6 other contributors 


                    Erik

Member since: 02/19/2015

405 Reputation

                                      4 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team 9-3, Leahy Winter 2015                        

                                                  Member of USF Tampa, Team 9-3, Leahy Winter 2015 



                    USFT-LEAHY-W15S9G3                     


                                            4 Members                     


                                            6 Guides authored