Difficulty
Difficult
Steps
23
Time Required
30 minutes - 1 hour
Sections
2
- Motherboard
- 14 steps
- Digital Display
- 9 steps
Flags
3
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
BackInsignia NS-CLIP02
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Locate the bottom of the device.
Locate the bottom of the device.
1024
Step 2
- Begin by using a metal spudger to peel back the adhesive sticker and locate the 11mm screw behind the sticker.
Begin by using a metal spudger to peel back the adhesive sticker and locate the 11mm screw behind the sticker.
Step 3
- Locate the 11mm screw behind the sticker.
Locate the 11mm screw behind the sticker.
Step 4
- Using a plastic opening tool, peel off the adhesive gel stoppers.
Using a plastic opening tool, peel off the adhesive gel stoppers.
Step 5
- Continue peeling the rest of the gel stoppers from the bottom of the device.
Continue peeling the rest of the gel stoppers from the bottom of the device.
Step 6
- Begin unscrewing the six 11mm screws with a Phillips head screw driver.
Begin unscrewing the six 11mm screws with a Phillips head screw driver.
Step 7
- Once you remove the bottom cover from the device, you will see the motherboard.
Once you remove the bottom cover from the device, you will see the motherboard.
Step 8
- Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.
Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.
Step 9
- Lift the motherboard away from the device.
Lift the motherboard away from the device.
Step 10
- Locate the four plugs connecting the motherboard to the rest of the device.
Locate the four plugs connecting the motherboard to the rest of the device.
Step 11
- Begin with removing the plug on the very left hand side.
Begin with removing the plug on the very left hand side.
Step 12
- Remove the plug on the very right hand side of the motherboard.
Remove the plug on the very right hand side of the motherboard.
Step 13
- Remove the plug in the front of the lcd screen plug.
Remove the plug in the front of the lcd screen plug.
Step 14
- Remove the LCD screen plug last. Then, follow the following instructions in reverse to replace the old motherboard with the new one.
Remove the LCD screen plug last. Then, follow the following instructions in reverse to replace the old motherboard with the new one.
Step 15
Digital Display
- Using the Phillips screwdriver, remove the three screws that run along the center of the base.
Using the Phillips screwdriver, remove the three screws that run along the center of the base.
Step 16
- Carefully remove the base.
Carefully remove the base.
Step 17
- Using the metal spudger, gently lift the face plate away from the display.
Using the metal spudger, gently lift the face plate away from the display.
Step 18
- Once the face plate is removed, use the Phillips screwdriver to remove the six screws shown here.
Once the face plate is removed, use the Phillips screwdriver to remove the six screws shown here.
Step 19
- Using the metal spudger, lift the speaker grilles from the display.
- The speaker grilles will hinge on the side closest to the display.
Using the metal spudger, lift the speaker grilles from the display.
The speaker grilles will hinge on the side closest to the display.
Step 20
- Using the Phillips screwdriver, remove the four screws shown here.
Using the Phillips screwdriver, remove the four screws shown here.
Step 21
- The two pieces of the display should easily separate.
The two pieces of the display should easily separate.
Step 22
- Using the Phillips screwdriver, remove the three screws shown here.
Using the Phillips screwdriver, remove the three screws shown here.
Step 23
- The digital display should now be easy to remove.
- Replace with new part.
The digital display should now be easy to remove.
Replace with new part.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Aubrey
Member since: 02/24/2015
213 Reputation
2 Guides authored
Badges:
9
+6 more badges
Team
USF Tampa, Team 9-3, Leahy Winter 2015
Member of USF Tampa, Team 9-3, Leahy Winter 2015
USFT-LEAHY-W15S9G3
4 Members
6 Guides authored
