Difficulty
Moderate
Steps
14
Time Required
Suggest a time??
Sections
1
- 30-Pin Connector
- 14 steps
Flags
3
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
Step Trimmer
This guide has unnecessary steps. Trim them to be more concise!
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackInsignia NS-CLIP02
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Before using this guide, be sure to inspect the spot in which the iPhone/iPod plugs into the device for debris that might be causing the audio issues. If you have another compatible device, be sure to test it on the 30-pin to be sure the iPhone/iPod is not the issue.
Before beginning be sure that the Insignia NS-CLIP02 is not plugged in to any socket, and disconnect any device connected to the 30-pin connector.
What you need
Step 1
30-Pin Connector
- Locate the bottom of the device.
Locate the bottom of the device.
1024
Step 2
- Begin by using the Metal Spudger to peel back the adhesive sticker and locate the screw beneath the sticker.
Begin by using the Metal Spudger to peel back the adhesive sticker and locate the screw beneath the sticker.
Step 3
- Locate the 11mm screw beneath the sticker.
Locate the 11mm screw beneath the sticker.
Step 4
- Using the Plastic Spudger, peel off the adhesive gel stoppers.
Using the Plastic Spudger, peel off the adhesive gel stoppers.
Step 5
- Continue peeling the rest of the gel stoppers from the bottom of the device.
Continue peeling the rest of the gel stoppers from the bottom of the device.
Step 6
- Begin unscrewing the six 11mm screws with a Phillips head screw driver.
Begin unscrewing the six 11mm screws with a Phillips head screw driver.
Step 7
- Once you peel off the bottom from the device, you will see the motherboard.
Once you peel off the bottom from the device, you will see the motherboard.
Step 8
- Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.
Unscrew the 9.5mm screw located near the center of the motherboard with a Phillips head screw driver.
Step 9
- Lift the motherboard from the device.
Lift the motherboard from the device.
Step 10
- Locate the four plugs connecting the motherboard to the rest of the device.
Locate the four plugs connecting the motherboard to the rest of the device.
Step 11
- Begin with removing the plug to your left.
Begin with removing the plug to your left.
Step 12
- Remove the plug to your right from the motherboard.
Remove the plug to your right from the motherboard.
Step 13
- Remove the plug in front of the LCD screen plug.
Remove the plug in front of the LCD screen plug.
Step 14
- Remove the LCD screen plug. Then, follow the previous instructions in reverse, replacing the old motherboard with the new one to fix the 30-Pin Connector.
Remove the LCD screen plug. Then, follow the previous instructions in reverse, replacing the old motherboard with the new one to fix the 30-Pin Connector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Erik
Member since: 02/19/2015
405 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
USF Tampa, Team 9-3, Leahy Winter 2015
Member of USF Tampa, Team 9-3, Leahy Winter 2015
USFT-LEAHY-W15S9G3
4 Members
6 Guides authored
