Difficulty
Moderate
Steps
12
Time Required
25 minutes
Sections
2
- Outer Panels
- 5 steps
- Cassette Door Latch
- 7 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Better Introduction
Improve this guide by completing or revising its introduction.
BackInsignia NS-BCDCAS1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Outer Panels
- Turn the boombox around to see the back, and then flip it upside down.
- Insert a 2.5mm flathead driver into the two holes next to the battery compartment.
- Turn the driver counterclockwise several times to loosen and pull out the 17mm screw.
Turn the boombox around to see the back, and then flip it upside down.
Insert a 2.5mm flathead driver into the two holes next to the battery compartment.
Turn the driver counterclockwise several times to loosen and pull out the 17mm screw.
1024
Step 2
- Peel off the two black square foams in front of the battery compartment to reveal a screw under each one.
Peel off the two black square foams in front of the battery compartment to reveal a screw under each one.
Step 3
- Remove the two 8mm screws using a 2.5mm flathead driver.
- The front grey panel will loosen up once the final screw is removed.
Remove the two 8mm screws using a 2.5mm flathead driver.
The front grey panel will loosen up once the final screw is removed.
Step 4
- Turn the boombox on its back.
- Release the front panel by pushing down on the latches holding the panels together.
- There are four silver latches on the top side of the panel and one on the bottom.
- Do not force the panel comletely off, there are cables attached inside.
Turn the boombox on its back.
Release the front panel by pushing down on the latches holding the panels together.
There are four silver latches on the top side of the panel and one on the bottom.
Do not force the panel comletely off, there are cables attached inside.
Step 5
- Turn the boombox around to view the back and lift the handle up.
- Using the same driver with 2.5mm flathead, remove the two 14mm screws under the handle.
- Gently lift the black top but do not pull completely away.
Turn the boombox around to view the back and lift the handle up.
Using the same driver with 2.5mm flathead, remove the two 14mm screws under the handle.
Gently lift the black top but do not pull completely away.
Step 6
Cassette Door Latch
- Start by unplugging the red and black cable connected to the motherboard
Start by unplugging the red and black cable connected to the motherboard
Step 7
- Unplug the red and pink wires connecting the top of the device to the motherboard
Unplug the red and pink wires connecting the top of the device to the motherboard
Step 8
- Disconnect the black shiny tape connecting the motherboard to the front of the device
- Also disconnect the pink and white wires connecting the cassette unit to the device.
Disconnect the black shiny tape connecting the motherboard to the front of the device
Also disconnect the pink and white wires connecting the cassette unit to the device.
Step 9
- After disconnecting all the wires, the front panel is now free and easy to work on.
After disconnecting all the wires, the front panel is now free and easy to work on.
Step 10
- To remove the cassette unit, use a 2.5mm flathead on the 4 screws holding the unit together.
To remove the cassette unit, use a 2.5mm flathead on the 4 screws holding the unit together.
Step 11
- While pressing the eject bottom, pull the cassette unit down and away from the front panel.
While pressing the eject bottom, pull the cassette unit down and away from the front panel.
Step 12
- The door latch is located on the bottom corner of the cassette unit.
The door latch is located on the bottom corner of the cassette unit.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
diego geldres
Member since: 09/12/2016
148 Reputation
1 Guide authored
Badges:
10
+7 more badges
Team
CSU Fullerton, Team 2-5, Bruce Fall 2016
Member of CSU Fullerton, Team 2-5, Bruce Fall 2016
CSUF-BRUCE-F16S2G5
4 Members
4 Guides authored
