Difficulty

Moderate

Steps

10

Time Required

                          10 minutes

Sections

2

  • Insignia NS-24ER310NA17 Disassembly
  • 6 steps
  • Speaker
  • 4 steps

Flags

0

  • BackInsignia NS-24ER310NA17

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lay the TV down
  • Place the TV face down so you have access to the back.

Place the TV face down so you have access to the back.

1024

Step 2

              Remove the base
  • Rest the TV on its top edge so you have access to the base.
  • Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.
  • Remove the base from the frame.

Rest the TV on its top edge so you have access to the base.

Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.

Remove the base from the frame.

Step 3

  • Lay the TV face down.
  • Use the Phillips #00 screwdriver to remove all of the Phillips Head Screws from the the back of the TV.

Lay the TV face down.

Use the Phillips #00 screwdriver to remove all of the Phillips Head Screws from the the back of the TV.

Step 4

              Pry the TV open
  • Stand the TV on its top edge.
  • Gently pry apart the front and back of the TV.
  • The two halves should pull apart easily since there are no longer any screws holding it together.

Stand the TV on its top edge.

Gently pry apart the front and back of the TV.

The two halves should pull apart easily since there are no longer any screws holding it together.

Step 5

              Disconnect wires
  • There are wires still connecting the two halves.
  • Remove all the pieces of tape to detach the wires from both sides.

There are wires still connecting the two halves.

Remove all the pieces of tape to detach the wires from both sides.

Step 6

  • Completely pry apart your TV.
  • You should have a clear view of the inside on both sides.

Completely pry apart your TV.

You should have a clear view of the inside on both sides.

Step 7

              Speaker
  • Unplug the red (right speaker) cord from the motherboard.
  • Unplug the white (left speaker) cord from the motherboard.

Unplug the red (right speaker) cord from the motherboard.

Unplug the white (left speaker) cord from the motherboard.

Step 8

  • Start by locating speaker in bottom of back panel.

Start by locating speaker in bottom of back panel.

Step 9

  • Remove screws on both sides holding the speaker in place.

Remove screws on both sides holding the speaker in place.

Step 10

  • Pull the speaker out of its casing, and repeat for the process for the other speaker.

Pull the speaker out of its casing, and repeat for the process for the other speaker.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Hannah Berenjfoorosh

Member since: 01/22/2018

518 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S16-G2, Banghart Winter 2018                        

                                                  Member of Cal Poly, Team S16-G2, Banghart Winter 2018 



                    CPSU-BANGHART-W18S16G2                     


                                            4 Members                     


                                            6 Guides authored