Difficulty
Easy
Steps
18
Time Required
3 minutes
Sections
3
- Insignia NS-24ER310NA17 Disassembly
- 6 steps
- Motherboard
- 10 steps
- Input/Output Board Covers
- 2 steps
Flags
1
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackInsignia NS-24ER310NA17
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lay the TV down
- Place the TV face down so you have access to the back.
Place the TV face down so you have access to the back.
1024
Step 2
Remove the base
- Rest the TV on its top edge so you have access to the base.
- Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.
- Remove the base from the frame.
Rest the TV on its top edge so you have access to the base.
Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.
Remove the base from the frame.
Step 3
- Lay the TV face down.
- Use the Phillips #00 screwdriver to remove all of the Phillips Head Screws from the the back of the TV.
Lay the TV face down.
Use the Phillips #00 screwdriver to remove all of the Phillips Head Screws from the the back of the TV.
Step 4
Pry the TV open
- Stand the TV on its top edge.
- Gently pry apart the front and back of the TV.
- The two halves should pull apart easily since there are no longer any screws holding it together.
Stand the TV on its top edge.
Gently pry apart the front and back of the TV.
The two halves should pull apart easily since there are no longer any screws holding it together.
Step 5
Disconnect wires
- There are wires still connecting the two halves.
- Remove all the pieces of tape to detach the wires from both sides.
There are wires still connecting the two halves.
Remove all the pieces of tape to detach the wires from both sides.
Step 6
- Completely pry apart your TV.
- You should have a clear view of the inside on both sides.
Completely pry apart your TV.
You should have a clear view of the inside on both sides.
Step 7
Motherboard
- Remove all strips of tape attached to the silver steel rectangular piece.
Remove all strips of tape attached to the silver steel rectangular piece.
Step 8
- Pull the red wire out from under the black plastic clip.
Pull the red wire out from under the black plastic clip.
Step 9
- Unscrew the four screws surrounding the steel rectangle with a Phillips 00 Screwdriver.
Unscrew the four screws surrounding the steel rectangle with a Phillips 00 Screwdriver.
Step 10
- Carefully lift the rectangular piece.
Carefully lift the rectangular piece.
Step 11
- The rectangular piece will still be attached to the motherboard beneath it with a strip of tape. Remove this strip of tape.
The rectangular piece will still be attached to the motherboard beneath it with a strip of tape. Remove this strip of tape.
Step 12
- Use a Phillips #00 screwdriver to remove the two screws on both sides of the motherboard.
Use a Phillips #00 screwdriver to remove the two screws on both sides of the motherboard.
Step 13
- Carefully lift the motherboard away from the television.
- Keep in mind that the motherboard is still attached by several thin wires and should not be tugged.
Carefully lift the motherboard away from the television.
Keep in mind that the motherboard is still attached by several thin wires and should not be tugged.
Step 14
- There are 5 wires attached to the motherboard. Remove the two thicker white wires to the right of the red wire.
There are 5 wires attached to the motherboard. Remove the two thicker white wires to the right of the red wire.
Step 15
- Remove the remaining three wires from the mainboard.
Remove the remaining three wires from the mainboard.
Step 16
- Carefully remove the mainboard from the television.
- You have now successfully removed the mainboard.
Carefully remove the mainboard from the television.
You have now successfully removed the mainboard.
Step 17
Input/Output Board Covers
- After following the prerequisite guides, you should have the main board off with the black plastic still on. To remove the plastic, unscrew the nut that holds this plastic to the cable input on the board.
After following the prerequisite guides, you should have the main board off with the black plastic still on. To remove the plastic, unscrew the nut that holds this plastic to the cable input on the board.
Step 18
- After removing the nut from the cable input, the black plastic should easily slide off of the inputs on the board. There are two separate pieces of plastic on the board, so be sure to remove both.
After removing the nut from the cable input, the black plastic should easily slide off of the inputs on the board. There are two separate pieces of plastic on the board, so be sure to remove both.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Patrick Dillon
Member since: 01/22/2018
156 Reputation
1 Guide authored
Badges:
4
+1 more badge
Team
Cal Poly, Team S16-G2, Banghart Winter 2018
Member of Cal Poly, Team S16-G2, Banghart Winter 2018
CPSU-BANGHART-W18S16G2
4 Members
6 Guides authored
