Difficulty

Moderate

Steps

18

Time Required

                          20 minutes

Sections

3

  • Insignia NS-24ER310NA17 Disassembly
  • 6 steps
  • Motherboard
  • 10 steps
  • Infrared Sensor
  • 2 steps

Flags

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

  • BackInsignia NS-24ER310NA17

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Lay the TV down
  • Place the TV face down so you have access to the back.

Place the TV face down so you have access to the back.

1024

Step 2

              Remove the base
  • Rest the TV on its top edge so you have access to the base.
  • Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.
  • Remove the base from the frame.

Rest the TV on its top edge so you have access to the base.

Use a Phillips #2 screwdriver to take out the four screws on the bottom of the base.

Remove the base from the frame.

Step 3

  • Lay the TV face down.
  • Use the Phillips #00 screwdriver to remove all of the Phillips Head Screws from the the back of the TV.

Lay the TV face down.

Use the Phillips #00 screwdriver to remove all of the Phillips Head Screws from the the back of the TV.

Step 4

              Pry the TV open
  • Stand the TV on its top edge.
  • Gently pry apart the front and back of the TV.
  • The two halves should pull apart easily since there are no longer any screws holding it together.

Stand the TV on its top edge.

Gently pry apart the front and back of the TV.

The two halves should pull apart easily since there are no longer any screws holding it together.

Step 5

              Disconnect wires
  • There are wires still connecting the two halves.
  • Remove all the pieces of tape to detach the wires from both sides.

There are wires still connecting the two halves.

Remove all the pieces of tape to detach the wires from both sides.

Step 6

  • Completely pry apart your TV.
  • You should have a clear view of the inside on both sides.

Completely pry apart your TV.

You should have a clear view of the inside on both sides.

Step 7

              Motherboard
  • Remove all strips of tape attached to the silver steel rectangular piece.

Remove all strips of tape attached to the silver steel rectangular piece.

Step 8

  • Pull the red wire out from under the black plastic clip.

Pull the red wire out from under the black plastic clip.

Step 9

  • Unscrew the four screws surrounding the steel rectangle with a Phillips 00 Screwdriver.

Unscrew the four screws surrounding the steel rectangle with a Phillips 00 Screwdriver.

Step 10

  • Carefully lift the rectangular piece.

Carefully lift the rectangular piece.

Step 11

  • The rectangular piece will still be attached to the motherboard beneath it with a strip of tape. Remove this strip of tape.

The rectangular piece will still be attached to the motherboard beneath it with a strip of tape. Remove this strip of tape.

Step 12

  • Use a Phillips #00 screwdriver to remove the two screws on both sides of the motherboard.

Use a Phillips #00 screwdriver to remove the two screws on both sides of the motherboard.

Step 13

  • Carefully lift the motherboard away from the television.
  • Keep in mind that the motherboard is still attached by several thin wires and should not be tugged.

Carefully lift the motherboard away from the television.

Keep in mind that the motherboard is still attached by several thin wires and should not be tugged.

Step 14

  • There are 5 wires attached to the motherboard. Remove the two thicker white wires to the right of the red wire.

There are 5 wires attached to the motherboard. Remove the two thicker white wires to the right of the red wire.

Step 15

  • Remove the remaining three wires from the mainboard.

Remove the remaining three wires from the mainboard.

Step 16

  • Carefully remove the mainboard from the television.
  • You have now successfully removed the mainboard.

Carefully remove the mainboard from the television.

You have now successfully removed the mainboard.

Step 17

              Infrared Sensor
  • Unplug ribbon cable from port on main board that corresponds with IR sensor.

Unplug ribbon cable from port on main board that corresponds with IR sensor.

Step 18

  • Unscrew single screw holding IR sensor and remove sensor with ribbon cable.

Unscrew single screw holding IR sensor and remove sensor with ribbon cable.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Joelle Hylton

Member since: 01/22/2018

233 Reputation

                                      1 Guide authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team S16-G2, Banghart Winter 2018                        

                                                  Member of Cal Poly, Team S16-G2, Banghart Winter 2018 



                    CPSU-BANGHART-W18S16G2                     


                                            4 Members                     


                                            6 Guides authored