Difficulty

Moderate

Steps

4

Time Required

                          25 minutes

Sections

1

  • Front Camera
  • 4 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackInsignia Flex Elite 7.85

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Camera
  • Make sure the device is turned off before taking it apart to avoid any injuries
  • Use a plastic opening tool to remove the metal backing of the tablet
  • Insert the plastic opening tool between the screen and metal backing. use a prying motion to lift the front case from the the metal panel.
  • move the tool around the perimeter of the device until the screen separates.
  • the volume and the power button will become free from device when the screen and metal backing are separated. These small pieces are easy to lose, be careful. They’re easy to put back into place when reassembling the tablet.

Make sure the device is turned off before taking it apart to avoid any injuries

Use a plastic opening tool to remove the metal backing of the tablet

Insert the plastic opening tool between the screen and metal backing. use a prying motion to lift the front case from the the metal panel.

move the tool around the perimeter of the device until the screen separates.

the volume and the power button will become free from device when the screen and metal backing are separated. These small pieces are easy to lose, be careful. They’re easy to put back into place when reassembling the tablet.

1024

Step 2

  • once the tablet is open, locate the camera
  • The camera is fitted in a small square compartment
  • Use a plastic opening tool to pry slightly on the back of the camera making it easier to come out of its compartment
  • When removing the camera, ensure that the red and black wire on top of it is not disconnected from the motherboard.

once the tablet is open, locate the camera

The camera is fitted in a small square compartment

Use a plastic opening tool to pry slightly on the back of the camera making it easier to come out of its compartment

When removing the camera, ensure that the red and black wire on top of it is not disconnected from the motherboard.

Step 3

  • Using a plastic opening tool, pry the camera from the compartment.
  • Pry around the perimeter of the camera until it comes out free.
  • Be careful, make sure the motherboard does not break.

Using a plastic opening tool, pry the camera from the compartment.

Pry around the perimeter of the camera until it comes out free.

Be careful, make sure the motherboard does not break.

Step 4

  • The front camera should be out of its compartment by now. Reinstall the new camera.

The front camera should be out of its compartment by now. Reinstall the new camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    JOSI ZULU

Member since: 03/20/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       UMass Dartmouth, Team S9-G2, Martin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S9-G2, Martin Spring 2017 



                    UMASSD-MARTIN-S17S9G2                     


                                            3 Members                     


                                            10 Guides authored