Difficulty

Easy

Steps

4

Time Required

                          10 minutes

Sections

1

  • Back Camera
  • 4 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Slice and Dice

The steps in this guide should be split up and made into a series of prerequisite guides.

  • BackInsignia Flex Elite 7.85

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Camera
  • Make sure the device is turned off before taking it apart to avoid any injuries.
  • Use a plastic opening tool to remove the metal backing of the tablet.
  • Insert the plastic opening tool between the screen and metal backing. Use a prying motion to lift the front case from the metal panel.
  • Move the tool around the perimeter of the device until the screen separates.
  • The volume and power button will become free from device when the screen and metal backing are separated. These small pieces are easy to lose, be careful. They’re easy to put back into place when reassembling the tablet.

Make sure the device is turned off before taking it apart to avoid any injuries.

Use a plastic opening tool to remove the metal backing of the tablet.

Insert the plastic opening tool between the screen and metal backing. Use a prying motion to lift the front case from the metal panel.

Move the tool around the perimeter of the device until the screen separates.

The volume and power button will become free from device when the screen and metal backing are separated. These small pieces are easy to lose, be careful. They’re easy to put back into place when reassembling the tablet.

1024

Step 2

  • Once the the tablet is open, locate the camera.
  • There is a small black ribbon connector which connects the camera to the motherboard.
  • Use a plastic opening tool to pry slightly on the black ribbon connector.
  • Bend the black ribbon connector slightly so it will not be in the way.

Once the the tablet is open, locate the camera.

There is a small black ribbon connector which connects the camera to the motherboard.

Use a plastic opening tool to pry slightly on the black ribbon connector.

Bend the black ribbon connector slightly so it will not be in the way.

Step 3

  • Using a plastic opening tool, pry the camera from the mount.
  • Pry around the perimeter of the camera until it comes free.
  • Be careful, make sure the plastic frame does not break.

Using a plastic opening tool, pry the camera from the mount.

Pry around the perimeter of the camera until it comes free.

Be careful, make sure the plastic frame does not break.

Step 4

  • The camera should be out of its housing by now. Reinstall new camera.

The camera should be out of its housing by now. Reinstall new camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Antonio Olivieri

Member since: 03/21/2017

401 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UMass Dartmouth, Team S9-G2, Martin Spring 2017                        

                                                  Member of UMass Dartmouth, Team S9-G2, Martin Spring 2017 



                    UMASSD-MARTIN-S17S9G2                     


                                            3 Members                     


                                            10 Guides authored