Difficulty
Moderate
Steps
6
Time Required
25 minutes
Sections
1
- Battery
- 6 steps
Flags
Slice and Dice
The steps in this guide should be split up and made into a series of prerequisite guides.
BackInsignia Flex Elite 7.85
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Make sure the device is turned off before taking it apart to avoid any injuries
- Use a plastic opening tool to remove the metal backing of the tablet.
- Insert the plastic opening tool between the screen and metal backing. Use a prying motion to lift the front case from the metal panel.
- Move the tool around the perimeter of the device until the screen separate.
- The volume and power button will become free from device when the screen and metal backing are separated. These small pieces are easy to lose, be careful. They’re easy to put back into place when reassembling the tablet.
Make sure the device is turned off before taking it apart to avoid any injuries
Use a plastic opening tool to remove the metal backing of the tablet.
Insert the plastic opening tool between the screen and metal backing. Use a prying motion to lift the front case from the metal panel.
Move the tool around the perimeter of the device until the screen separate.
The volume and power button will become free from device when the screen and metal backing are separated. These small pieces are easy to lose, be careful. They’re easy to put back into place when reassembling the tablet.
1024
Step 2
- Use a plastic opening tool to free the orange connector ribbon by placing the tool on the connector. Then peal the connector ribbon and bend it backwards so it is not in the way.
Use a plastic opening tool to free the orange connector ribbon by placing the tool on the connector. Then peal the connector ribbon and bend it backwards so it is not in the way.
Step 3
- Peel back the three pieces of tape circled in the picture.
Peel back the three pieces of tape circled in the picture.
Step 4
- Free the battery from the motherboard by prying slightly with the opening tool
Free the battery from the motherboard by prying slightly with the opening tool
Step 5
- Use the plastic opening tool to remove the battery from the screen.
- Use a plastic opening tool to gently but firmly pry the battery up along the edges until it is free.
- Do not bend or puncture the battery or the battery will begin to leak.
- This step takes the longest. Be careful and do not rush through it. The glue on the back of the battery is difficult to free up.
Use the plastic opening tool to remove the battery from the screen.
Use a plastic opening tool to gently but firmly pry the battery up along the edges until it is free.
Do not bend or puncture the battery or the battery will begin to leak.
This step takes the longest. Be careful and do not rush through it. The glue on the back of the battery is difficult to free up.
Step 6
- The battery should be removed from the tablet. Now replace the battery.
The battery should be removed from the tablet. Now replace the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Antonio Olivieri
Member since: 03/21/2017
401 Reputation
4 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team S9-G2, Martin Spring 2017
Member of UMass Dartmouth, Team S9-G2, Martin Spring 2017
UMASSD-MARTIN-S17S9G2
3 Members
10 Guides authored
