Difficulty

Moderate

Steps

5

Time Required

                          20 minutes

Sections

2

  • Back Casing
  • 2 steps
  • Battery
  • 3 steps

Flags

0

  • BackInsignia Flex 8 NS-P16AT08

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Casing
  • Make sure device is powered off.
  • Wedge the plastic opening tool anywhere in the seam between the back casing and screen.
  • Slide the plastic opening tool along the sides and corners of the seam of the device while it separates from the screen.
  • You will hear the popping sound of the plastic connections separating from the device.

Make sure device is powered off.

Wedge the plastic opening tool anywhere in the seam between the back casing and screen.

Slide the plastic opening tool along the sides and corners of the seam of the device while it separates from the screen.

You will hear the popping sound of the plastic connections separating from the device.

1024

Step 2

  • Lift the back casing away from the screen.
  • Set casing aside.

Lift the back casing away from the screen.

Set casing aside.

Step 3

              Battery
  • Gently peel the tape that is covering the cable connections going to and from the battery and set tape aside.
  • This will expose the cable connections in preparation for disconnecting the cables and battery.

Gently peel the tape that is covering the cable connections going to and from the battery and set tape aside.

This will expose the cable connections in preparation for disconnecting the cables and battery.

Step 4

  • Locate battery cable connection.
  • Pull gently on cable that connects the battery to the motherboard.
  • Cable will stay attached to battery but be removed from motherboard.
  • If pulling gently doesn’t loosen cable, wiggle connection while pulling gently.

Locate battery cable connection.

Pull gently on cable that connects the battery to the motherboard.

Cable will stay attached to battery but be removed from motherboard.

If pulling gently doesn’t loosen cable, wiggle connection while pulling gently.

Step 5

  • Slide the nylon spudger gently underneath the battery.
  • Using the nylon spudger, gently pry battery from adhesive on metal base.
  • Do not puncture or bend battery.
  • Working around the battery, pry up all the sides to remove the battery from the metal base.
  • The adhesive is very strong. Separating the battery from the metal base may be difficult.

Slide the nylon spudger gently underneath the battery.

Using the nylon spudger, gently pry battery from adhesive on metal base.

Do not puncture or bend battery.

Working around the battery, pry up all the sides to remove the battery from the metal base.

The adhesive is very strong. Separating the battery from the metal base may be difficult.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.

Author

                                      with 2 other contributors 


                    Emily Guidinger

Member since: 04/01/2016

527 Reputation

                                      4 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Eastern Washington University, Team 2-1, Andersen Spring 2016                        

                                                  Member of Eastern Washington University, Team 2-1, Andersen Spring 2016 



                    EWU-ANDERSEN-S16S2G1                     


                                            5 Members                     


                                            10 Guides authored

stephanie maxwell - Sep 25, 2016

Reply

We’re do u get a new battery from ???

mathew - Mar 16, 2017

mathew - Mar 16, 2017

Reply

i replaced the battery for a customer and now the tablet is stuck at boot hmmm…..

after about 3 minutes the device booted apparently I am just too impatient, still another happy customer, thanks!

tesfay gmichael - Feb 6, 2018

Reply

Pls help me to  send me the phone number of the above mentioned Mattew or give him my phone number. I will discuss with him  to replace my charger plug and possibly the battery. thanks.