Difficulty

Moderate

Steps

5

Time Required

                          20 minutes

Sections

2

  • Back Casing
  • 2 steps
  • Battery
  • 3 steps

Flags

1

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

  • BackInsignia Flex 8 NS-15AT08

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Casing
  • Insert a plastic opening tool into the seam between the back casing and the screen to separate the back casing from the tablet.
  • You may need to use a metal opening tool for extra prying power, but beware that it can scratch your device or damage the internal components if the tool is inserted too deep.
  • You will hear the tabs pop as you separate the back casing around the tablet.

Insert a plastic opening tool into the seam between the back casing and the screen to separate the back casing from the tablet.

You may need to use a metal opening tool for extra prying power, but beware that it can scratch your device or damage the internal components if the tool is inserted too deep.

You will hear the tabs pop as you separate the back casing around the tablet.

1024

Step 2

  • Lift the back casing away from the rest of the device which should include the exposed circuit board and screen.
  • Set the casing aside.

Lift the back casing away from the rest of the device which should include the exposed circuit board and screen.

Set the casing aside.

Step 3

              Battery
  • Wedge a plastic opening tool in between the male, black module and female, white module to disconnect the wires module from the circuit board.

Wedge a plastic opening tool in between the male, black module and female, white module to disconnect the wires module from the circuit board.

Step 4

  • Use a plastic opening tool to pry the battery from the circuit board by wedging it around the perimeter of the battery.

Use a plastic opening tool to pry the battery from the circuit board by wedging it around the perimeter of the battery.

Step 5

  • Remove the battery from the circuit board by lifting it with the spudger or finger.

Remove the battery from the circuit board by lifting it with the spudger or finger.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    Jeremy Anaya

Member since: 09/23/2015

316 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Baylor, Team 6-7, Williams Fall 2015                        

                                                  Member of Baylor, Team 6-7, Williams Fall 2015 



                    BU-WILLIAMS-F15S6G7                     


                                            3 Members                     


                                            10 Guides authored