Insignia Flex 7 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          5 minutes

Sections

Battery
3 steps

Flags

BackInsignia Flex 7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Insert the edge of the plastic opener into the grove between the screen and back cover around the perimeter of the device.
Then using a gentle prying motion, create a gap large enough to use your fingers to separate the two halves.

Insert the edge of the plastic opener into the grove between the screen and back cover around the perimeter of the device.

Then using a gentle prying motion, create a gap large enough to use your fingers to separate the two halves.

1024

Step 2

Place the tip of the spudger on each side of the battery’s electrical connector.
Then using a gentle match-striking motion, loosen both sides of the battery’s electrical connector.

Place the tip of the spudger on each side of the battery’s electrical connector.

Then using a gentle match-striking motion, loosen both sides of the battery’s electrical connector.

Step 3

Insert the flat end of the spudger under one side of the battery.
Then using a gentle prying and sliding motion, separate the battery from the case. There are two lengthwise strips of glue holding it down.
Repeat the process for the other side of the battery.

Insert the flat end of the spudger under one side of the battery.

Then using a gentle prying and sliding motion, separate the battery from the case. There are two lengthwise strips of glue holding it down.

Repeat the process for the other side of the battery.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 3 other contributors

                    Jonathan May

Member since: 09/28/2015

307 Reputation

                                      1 Guide authored                  



                       Badges:
                       16







                                                        +13 more badges

Team

                       Eastern Washington University, Team 1-6, Matresse Fall 2015                        

                                                  Member of Eastern Washington University, Team 1-6, Matresse Fall 2015 



                    EWU-MATRESSE-F15S1G6                     


                                            4 Members                     


                                            10 Guides authored

Mike - Dec 21, 2015

Link for replacement battery?

Jose Garza Lozano - Feb 25, 2016

I’m also looking for a replacement battery and i’ve only found batteries with two cables instead of the 5 this one has

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team