Insignia Flex 10 1 Ns P10A7100 Battery Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Battery
4 steps

Flags

BackInsignia Flex 10.1 NS-P10A7100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Use the blue iFixit opening tool to remove the backing of the device.
Wedge the tool in the crease between the device backing and screen.

Use the blue iFixit opening tool to remove the backing of the device.

Wedge the tool in the crease between the device backing and screen.

1024

Step 2

Disconnect the larger ribbon that runs along the top of the battery and connects to the motherboard.
Lift up the connector by pulling it up with your fingernail. The ribbon will then be released and you can detach it.

Disconnect the larger ribbon that runs along the top of the battery and connects to the motherboard.

Lift up the connector by pulling it up with your fingernail. The ribbon will then be released and you can detach it.

Step 3

Detach the five colored wires that connect the battery to the motherboard.
Use two fingers and place one on either side of the white plastic encasing the wires.
Pull on this piece to release it from the motherboard.
Now the battery is detached from the motherboard.

Detach the five colored wires that connect the battery to the motherboard.

Use two fingers and place one on either side of the white plastic encasing the wires.

Pull on this piece to release it from the motherboard.

Now the battery is detached from the motherboard.

Step 4

The battery is now only connected to the device by the glue on the bottom.
Use the iFixit opening tool to wedge the battery off of the device. You will have to use some force to pry the battery off of the device.
Now that your battery is removed it is ready for replacement.

The battery is now only connected to the device by the glue on the bottom.

Use the iFixit opening tool to wedge the battery off of the device. You will have to use some force to pry the battery off of the device.

Now that your battery is removed it is ready for replacement.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Hannah

Member since: 02/05/2019

289 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of Michigan, Team S1-G3, Li Winter 2019                        

                                                  Member of University of Michigan, Team S1-G3, Li Winter 2019 



                    UMIC-LI-W19S1G3                     


                                            4 Members                     


                                            1 Guide authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team