Difficulty

Easy

Steps

8

Time Required

Suggest a time??

Sections

2

  • Front Cover
  • 7 steps
  • Button Pad
  • 1 step

Flags

0

  • BackInFocus Remote

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Front Cover
  • Use your finger to press the tab on the battery cover.
  • Lift the cover up and out.

Use your finger to press the tab on the battery cover.

Lift the cover up and out.

1024

Step 2

  • Use your finger to lift the two AA batteries up and out of the remote.

Use your finger to lift the two AA batteries up and out of the remote.

Step 3

  • Remove the three 9mm Phillips #00 screws located on the backside of the remote.

Remove the three 9mm Phillips #00 screws located on the backside of the remote.

Step 4

  • Insert a plastic opening tool into the seam between the black top cover and silver base at the bottom edge of the remote.
  • Carefully pry the top cover up and away from the base.

Insert a plastic opening tool into the seam between the black top cover and silver base at the bottom edge of the remote.

Carefully pry the top cover up and away from the base.

Step 5

  • Insert an opening pick into the seam on side of the remote, even with the InFocus Label.
  • Slide the opening pick along the side of the remote, moving towards the buttons.
  • There is a plastic tab that holds the covers to the base, located even with the Source button. Push the pick through with a bit more force here to disconnect the cover.

Insert an opening pick into the seam on side of the remote, even with the InFocus Label.

Slide the opening pick along the side of the remote, moving towards the buttons.

There is a plastic tab that holds the covers to the base, located even with the Source button. Push the pick through with a bit more force here to disconnect the cover.

Step 6

  • Repeat the previous step on the other side of the remote, working from the InFocus label towards the buttons until the entire cover is loose.

Repeat the previous step on the other side of the remote, working from the InFocus label towards the buttons until the entire cover is loose.

Step 7

  • Firmly grasp the cover and lift it away from the remote.

Firmly grasp the cover and lift it away from the remote.

Step 8

              Button Pad
  • Lift the button pad up and out of the remote.

Lift the button pad up and out of the remote.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Paige Reisman

Member since: 04/07/2014

22,924 Reputation

                                      15 Guides authored                  



                       Badges:
                       38







                                                        +35 more badges