Difficulty
Easy
Steps
4
Time Required
5 - 10 minutes
Sections
1
- Lamp
- 4 steps
Flags
2
Incorrect Tools
Help make this guide better by using the correct tools in images and/or text.
Better Introduction
Improve this guide by completing or revising its introduction.
BackInFocus LP540
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lamp
- Place the projector on its back with the control buttons facing down.
- Remove the black 7mm screw on the external case with a Phillips 2 screwdriver.
Place the projector on its back with the control buttons facing down.
Remove the black 7mm screw on the external case with a Phillips 2 screwdriver.
1024
Step 2
- Use the plastic flat-head to remove the lamp lid.
Use the plastic flat-head to remove the lamp lid.
Step 3
- Remove the 7mm screw near the bottom center with a Philips 2 screwdriver head.
- Loosen but do not remove the 7mm screw near the upper right corner with the Phillips 2 screwdriver head.
Remove the 7mm screw near the bottom center with a Philips 2 screwdriver head.
Loosen but do not remove the 7mm screw near the upper right corner with the Phillips 2 screwdriver head.
Step 4
- Grab the silver handle.
- Unhook the handle so it can move freely.
- Pull the handle straight up until the lamp is completely removed from projector.
Grab the silver handle.
Unhook the handle so it can move freely.
Pull the handle straight up until the lamp is completely removed from projector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 6 other contributors
Jorge L Navarro
Member since: 01/22/2014
533 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Cal Poly, Team 13-17, Regan Winter 2014
Member of Cal Poly, Team 13-17, Regan Winter 2014
CPSU-REGAN-W14S13G17
6 Members
5 Guides authored
