Difficulty

Moderate

Steps

7

Time Required

                          5 - 10 minutes

Sections

3

  • Top Plate
  • 3 steps
  • Motherboard
  • 3 steps
  • Fan
  • 1 step

Flags

0

  • BackInFocus IN35W

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Top Plate
  • Use the plastic opening tool to remove the front plastic casing surrounding the lens.
  • Pry apart the clips securing the top and bottom of the device using the plastic opening tool.

Use the plastic opening tool to remove the front plastic casing surrounding the lens.

Pry apart the clips securing the top and bottom of the device using the plastic opening tool.

1024

Step 2

  • Pull the top piece up.
  • The two gray ventilation grates will slip off the device.

Pull the top piece up.

The two gray ventilation grates will slip off the device.

Step 3

  • Detach the white speaker wire that connects the motherboard to the top piece.
  • Remove the top cover from the device.

Detach the white speaker wire that connects the motherboard to the top piece.

Remove the top cover from the device.

Step 4

              Motherboard
  • Detach all six of the cables and speaker wires from the white connectors on the motherboard.

Detach all six of the cables and speaker wires from the white connectors on the motherboard.

Step 5

  • Remove the six 4 mm Torx TR10 screws from the motherboard.

Remove the six 4 mm Torx TR10 screws from the motherboard.

Step 6

  • Carefully grasp the outsides of the motherboard and pull it up to remove it from the device.

Carefully grasp the outsides of the motherboard and pull it up to remove it from the device.

Step 7

              Fan
  • The fan is located on the side of the device.
  • Lift the fan up and out of the projector body.

The fan is located on the side of the device.

Lift the fan up and out of the projector body.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Grace Hubert

Member since: 10/18/2021

608 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       UMass Dartmouth, Team 1-2, Simcock Fall 2021                        

                                                  Member of UMass Dartmouth, Team 1-2, Simcock Fall 2021 



                    UMASSD-SIMCOCK-F21S1G2                     


                                            4 Members                     


                                            5 Guides authored