Difficulty

Moderate

Steps

4

Time Required

                          10 - 20 minutes

Sections

2

  • Top Plate
  • 2 steps
  • LED Touch Board
  • 2 steps

Flags

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackInFocus IN3114

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Top Plate
  • Use a Phillips #1 screwdriver to remove the 1.2 cm Phillips-head screw from each side of the projector.

Use a Phillips #1 screwdriver to remove the 1.2 cm Phillips-head screw from each side of the projector.

1024

Step 2

  • Use your hands to slide the top plate off of the projector.
  • Lift and remove the plate.

Use your hands to slide the top plate off of the projector.

Lift and remove the plate.

Step 3

              LED Touch Board
  • Use the opening tool to slide off the control panel cover.
  • Use a heat gun as necessary
  • Remove the cover.

Use the opening tool to slide off the control panel cover.

Use a heat gun as necessary

Remove the cover.

Step 4

  • Unplug the ribbon cable from the edge of the LED touch board.
  • Remove the LED touch board.

Unplug the ribbon cable from the edge of the LED touch board.

Remove the LED touch board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Kevin Li

Member since: 03/30/2022

85 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       University of Alabama, Team 3-3, Bedsole Spring 2022                        

                                                  Member of University of Alabama, Team 3-3, Bedsole Spring 2022 



                    UA-BEDSOLE-S22S3G3                     


                                            4 Members                     


                                            4 Guides authored