Infocus In3104 Filter Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          5 - 10 minutes            

Sections

2

• Top Cover
• 2 steps
• Filter
• 1 step

Flags

0

• BackInFocus IN3104

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Top Cover               

• Turn the projector so that the lens is facing you.
• On the left side of the projector, there is a screw and a knob inside of the small grate.
• Use a Phillips #1 screwdriver to remove the 6 mm screw that secures top cover.
• Remove the service cover.

Turn the projector so that the lens is facing you.

On the left side of the projector, there is a screw and a knob inside of the small grate.

Use a Phillips #1 screwdriver to remove the 6 mm screw that secures top cover.

Remove the service cover.

1024

Step 2

• Use a Phillips #1 screwdriver to remove the seven 6 mm screws.
• Use a Phillips #1 screwdriver to remove the two 5 mm screws.
• Remove the top cover.
• Do not pull the cover too hard. It may damage the wire that is connected to the motherboard.

Use a Phillips #1 screwdriver to remove the seven 6 mm screws.

Use a Phillips #1 screwdriver to remove the two 5 mm screws.

Remove the top cover.

Do not pull the cover too hard. It may damage the wire that is connected to the motherboard.

Step 3

              Filter               

• Use a Phillips # 1 screw driver to remove the 6 mm screw that secures the filter.
• Once the screw is removed, remove the filter by pulling it straight out.

Use a Phillips # 1 screw driver to remove the 6 mm screw that secures the filter.

Once the screw is removed, remove the filter by pulling it straight out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Tae Min Kim                     

Member since: 01/24/2020

409 Reputation

                                      5 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       Embry-Riddle Aeronautical University, Team S5-G5, Watkins Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S5-G5, Watkins Spring 2020 



                    ERAU-WATKINS-S20S5G5                     


                                            4 Members                     


                                            7 Guides authored