Infinity V2 10 1 Camera Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 minutes

Sections

Back Case
2 steps
Camera
2 steps

Flags

BackInfinity v2 10.1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Case

Slightly pry open one corner of the device by using your finger nail to separate the screen from the back case.
Use an opening tool to carefully detach the back case from the tablet. Start by inserting the tool where your fingernail opened a gap, and work around all four sides of the device.
There will be a slight click noise as you free each tab.
Once the case is completely free, carefully lift it and place it face up on the workstation, being cautious not to damage the speaker wires connecting the two halves.

Slightly pry open one corner of the device by using your finger nail to separate the screen from the back case.

Use an opening tool to carefully detach the back case from the tablet. Start by inserting the tool where your fingernail opened a gap, and work around all four sides of the device.

There will be a slight click noise as you free each tab.

Once the case is completely free, carefully lift it and place it face up on the workstation, being cautious not to damage the speaker wires connecting the two halves.

1024

Step 2

Remove the speakers from the case by gently lifting them up and out of their slots.

Remove the speakers from the case by gently lifting them up and out of their slots.

Step 3

              Camera

Use your thumb or opening tool to lift the black connector holding in the ribbon cable.

Use your thumb or opening tool to lift the black connector holding in the ribbon cable.

Step 4

Remove the camera by gently picking it up and pulling it free from the connector.
Avoid touching the lens of either camera.

Remove the camera by gently picking it up and pulling it free from the connector.

Avoid touching the lens of either camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors

                    sammytarbokas

Member since: 10/31/2019

193 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S2-G4, Barthe Fall 2019                        

                                                  Member of UMass Dartmouth, Team S2-G4, Barthe Fall 2019 



                    UMASSD-BARTHE-F19S2G4                     


                                            3 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team