Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

1

  • Massage Mechanism
  • 6 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackInfinity 2D Massage Chair (Rongtai)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              This guide is the second of two guides for replacement of the massage mech in a 2D chair.
  • The first guide showed you how to access the mech and mech track. Now we will remove the mech from the chair.

The first guide showed you how to access the mech and mech track. Now we will remove the mech from the chair.

1024

Step 2

              Disconnect wires from mech. This can be done at the mech itself following the color chart below.
  • Another option is to cut the zip ties on the back mech cable and follow it down the the base of the chair. It can be unplugged from the connector and the mech can be removed with the back cable connected in this way. Make sure you disconnect using the white connectors show in the bottom of the image.

Another option is to cut the zip ties on the back mech cable and follow it down the the base of the chair. It can be unplugged from the connector and the mech can be removed with the back cable connected in this way. Make sure you disconnect using the white connectors show in the bottom of the image.

Step 3

              The mech will be driven out through the top of the track.
  • To do this you need to remove the 4 screws and then lift the top bar out and set aside.

To do this you need to remove the 4 screws and then lift the top bar out and set aside.

Step 4

              If motor is functional, you can use the chair to drive the mech up to the top.
  • If motor will drive on its own you can skip steps 5 and go straight to 6.
  • To drive the mech go into a manual massage and then choose point mode. This will let you use the up and down arrows to drive the mech up to the top manually. You may need to remove the upper sensor to allow the mech to move past.

If motor will drive on its own you can skip steps 5 and go straight to 6.

To drive the mech go into a manual massage and then choose point mode. This will let you use the up and down arrows to drive the mech up to the top manually. You may need to remove the upper sensor to allow the mech to move past.

Step 5

              Drive the mech out of the top of the track.
  • You can use a flat head screwdriver or power screwdriver to manually drive the motor up and out of the chair.

You can use a flat head screwdriver or power screwdriver to manually drive the motor up and out of the chair.

Step 6

              Carefully lift mech out of chair.
  • Once the motor is no longer able to move up (reached the top of the track) you can lift the mech up and out.

Once the motor is no longer able to move up (reached the top of the track) you can lift the mech up and out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Timothy Allen

Member since: 07/05/2018

307 Reputation

                                      2 Guides authored                  



                       Badges:
                       3