Infant Optics Dxr 8 Monitor Screen Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          20 - 35 minutes            

Sections

2

• Internal Monitor Components
• 3 steps
• Monitor Screen
• 4 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackInfant Optics DXR-8

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Internal Monitor Components               

• Using the plastic opening tool, remove screen protector from front of monitor.

Using the plastic opening tool, remove screen protector from front of monitor.

1024

Step 2

• Remove the six 4mm screws using a Phillips #00 screwdriver.
• Remove the screen, exposing the circuit board.
• Turn device over to expose rear circuit board.

Remove the six 4mm screws using a Phillips #00 screwdriver.

Remove the screen, exposing the circuit board.

Turn device over to expose rear circuit board.

Step 3

• Disconnect speaker from monitor for ease of access by unplugging wire.

Disconnect speaker from monitor for ease of access by unplugging wire.

Step 4

              Monitor Screen               

• Using a plastic opening tool, disconnect the ribbon cable connector.
• Gently separate the ribbon cable from the motherboard.

Using a plastic opening tool, disconnect the ribbon cable connector.

Gently separate the ribbon cable from the motherboard.

Step 5

• Using a Phillips #000 screwdriver, remove the four 4mm screws around the edge of the motherboard.
• Flip the motherboard away from the front case to reveal the screen on the other side.

Using a Phillips #000 screwdriver, remove the four 4mm screws around the edge of the motherboard.

Flip the motherboard away from the front case to reveal the screen on the other side.

Step 6

• Using a plastic opening tool, carefully pry the top retaining frame off of the screen. Start in one corner and work around the bottom of the frame.

Using a plastic opening tool, carefully pry the top retaining frame off of the screen. Start in one corner and work around the bottom of the frame.

Step 7

• Using a plastic opening pick, carefully pry a corner of the screen away from the motherboard.
• Lift the screen off of the motherboard.

Using a plastic opening pick, carefully pry a corner of the screen away from the motherboard.

Lift the screen off of the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Daniel Edward Camp                     

Member since: 02/18/2021

125 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       The Citadel Military College of South Carolina, Team S3-G1, Eggleston Spring 2021                        

                                                  Member of The Citadel Military College of South Carolina, Team S3-G1, Eggleston Spring 2021 



                    CMCSC-EGGLESTON-S21S3G1                     


                                            3 Members                     


                                            3 Guides authored                     

Ro Brandi - Dec 29, 2021

Reply

Hey Daniel!

Thanks for sharing ??

Where did you get the replacement part?

Stebe - Jan 4, 2022

Hilitand LQ035NC111 LCD Display, 3.5inch TFT RGB LCD Display Module 320 x 240 Display Panel LQ035NC111 54pin LCD