Difficulty
Moderate
Steps
5
Time Required
15 minutes
Sections
2
- Infant Optics DXR-8 Camera Disassembly
- 3 steps
- Camera Speaker
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackInfant Optics DXR-8
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Infant Optics DXR-8 Camera Disassembly
- Position the camera with bottom facing toward you.
- Using the plastic opening tool, remove all four rubber ends from the bottom of the camera.
Position the camera with bottom facing toward you.
Using the plastic opening tool, remove all four rubber ends from the bottom of the camera.
1024
Step 2
- Remove the four 4 mm screws beneath rubber ends using the Phillips #00 screwdriver.
Remove the four 4 mm screws beneath rubber ends using the Phillips #00 screwdriver.
Step 3
- Open the bottom of the camera to reveal the circuit board and speaker.
Open the bottom of the camera to reveal the circuit board and speaker.
Step 4
Camera Speaker
- Disconnect the speaker cable from the circuit board for ease of access.
Disconnect the speaker cable from the circuit board for ease of access.
Step 5
- Lift the speaker from the casing using a metal spudger.
- Place a new 8W speaker in the casing.
Lift the speaker from the casing using a metal spudger.
Place a new 8W speaker in the casing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Kyle Staudt
Member since: 10/02/2019
103 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
The Citadel Military College of South Carolina, Team S2-G1, Eggleston Fall 2019
Member of The Citadel Military College of South Carolina, Team S2-G1, Eggleston Fall 2019
CMCSC-EGGLESTON-F19S2G1
3 Members
3 Guides authored
